* * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * 2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * 0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * lcp 6500.0 16.4 lcp 6550.0 16.4 lcp 6600.0 16.4 lcp 6618.0 19.0529 lcp 6620.0 18.5064 lcp 6622.0 18.0527 lcp 6624.0 17.6123 lcp 6626.0 17.1496 lcp 6628.0 16.7590 lcp 6630.0 16.3998 lcp 6632.0 16.1372 lcp 6634.0 15.7155 lcp 6636.0 15.4398 lcp 6638.0 15.1370 lcp 6640.0 14.6632 lcp 6642.0 14.4061 lcp 6644.0 14.1798 lcp 6646.0 14.0493 lcp 6648.0 13.8227 lcp 6650.0 13.6859 lcp 6652.0 13.7369 lcp 6654.0 13.5756 lcp 6656.0 13.4503 lcp 6658.0 13.3134 lcp 6660.0 13.2010 lcp 6662.0 12.9848 lcp 6664.0 12.8597 lcp 6666.0 12.5006 lcp 6668.0 11.9853 lcp 6670.0 11.5995 lcp 6672.0 11.2833 lcp 6674.0 11.2019 lcp 6676.0 11.2131 lcp 6678.0 11.2549 lcp 6680.0 11.4041 lcp 6682.0 11.4655 lcp 6684.0 11.7132 lcp 6686.0 11.8513 lcp 6688.0 12.0454 lcp 6690.0 11.9794 lcp 6692.0 12.0403 lcp 6694.0 12.0306 lcp 6696.0 12.0322 lcp 6698.0 12.1661 lcp 6700.0 12.1805 lcp 6702.0 12.4468 lcp 6704.0 12.5247 lcp 6706.0 12.6318 lcp 6708.0 12.6530 lcp 6710.0 12.5448 lcp 6712.0 12.5606 lcp 6714.0 12.4547 lcp 6810.0 16.4000 lcp 6850.0 16.4 * rcp 6500.0 20.9 rcp 6550.0 20.9 rcp 6600.0 20.9 rcp 6618.0 19.6673 rcp 6620.0 19.9819 rcp 6622.0 20.0176 rcp 6624.0 19.7161 rcp 6626.0 19.5053 rcp 6628.0 19.4157 rcp 6630.0 19.4345 rcp 6632.0 19.4992 rcp 6634.0 19.6152 rcp 6636.0 19.6536 rcp 6638.0 19.6317 rcp 6640.0 19.5526 rcp 6642.0 19.6500 rcp 6644.0 19.6923 rcp 6646.0 19.7728 rcp 6648.0 20.0771 rcp 6650.0 20.5801 rcp 6652.0 21.3788 rcp 6654.0 22.3266 rcp 6656.0 22.6512 rcp 6658.0 22.8558 rcp 6660.0 22.7781 rcp 6662.0 22.7055 rcp 6664.0 22.4828 rcp 6666.0 21.6840 rcp 6668.0 20.8197 rcp 6670.0 20.2163 rcp 6672.0 19.9666 rcp 6674.0 19.9209 rcp 6676.0 20.0687 rcp 6678.0 20.0728 rcp 6680.0 20.0710 rcp 6682.0 20.2393 rcp 6684.0 20.4201 rcp 6686.0 20.6047 rcp 6688.0 20.8401 rcp 6690.0 21.1390 rcp 6692.0 21.3880 rcp 6694.0 21.5305 rcp 6696.0 21.8632 rcp 6698.0 21.9919 rcp 6700.0 22.0712 rcp 6702.0 22.2744 rcp 6704.0 22.3528 rcp 6706.0 22.3141 rcp 6708.0 22.2639 rcp 6710.0 22.1096 rcp 6712.0 22.0025 rcp 6714.0 22.0846 rcp 6810.0 20.9142 rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table