* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
2011 08 18
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
0.223 0.223
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*Astronomy Curve ??
*ELEV POLY 0.966 0.0021 -0.00006   
* Geodesy curve:
ELEV POLY 0.4535 0.0234 -0.00026
*
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
lcp 8160    5.8
lcp 8180    5.1
lcp 8200    6.6
lcp 8220    4.2
lcp 8240    4.6
lcp 8260    6.8
lcp 8280    6.1
lcp 8300    5.4
lcp 8320    7.5
lcp 8340    6.2
lcp 8360    5.9
lcp 8380    5.4
lcp 8395.5 5.3581
lcp 8400.0 5.3383
lcp 8411.5 5.2875
lcp 8427.5 5.1992
lcp 8443.5 5.1315
lcp 8460    4.9
lcp 8480    4.0
lcp 8500    6.3
lcp 8520    5.8
lcp 8540    7.0
lcp 8560    6.6
lcp 8580    4.4
lcp 8600    4.9
lcp 8620    6.6
lcp 8640    4.4
lcp 8660    8.4
lcp 8680    6.6
lcp 8700    5.0
lcp 8720    6.7
lcp 8740    6.0
lcp 8760    7.2
lcp 8780    8.4
lcp 8800    5.1
lcp 8820    7.4
lcp 8840    6.4
lcp 8860    6.4
lcp 8880    5.4
lcp 8900    5.4
lcp 8920    6.9
lcp 8940    6.3
lcp 8960    4.7
lcp 8980    6.8
rcp 8160    5.5
rcp 8180    2.6
rcp 8200    4.9
rcp 8217.0 4.4433
rcp 8257.0 4.5540
rcp 8357.0 4.4156
rcp 8400.0 4.5839
rcp 8517.0 4.6351
rcp 8737.0 4.5517
rcp 8857.0 4.6412
rcp 8917.0 4.6722
rcp 8937.0 4.6612
rcp 8940    4.2
rcp 8960    4.4
rcp 8980    6.2
end_tcal_table
*
* Trec: receiver temperature
*
8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2008 08 08
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*ELEV POLY 0.966 0.0021 -0.00006
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8400    5.7
*lcp 8420    7.3
*lcp 8440    5.4
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8400    4.0
*rcp 8420    4.5
*rcp 8440    5.3
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2011 03 14
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*Astronomy Curve ??
*ELEV POLY 0.966 0.0021 -0.00006   
* Geodesy curve:
*ELEV POLY 0.94 0.0035 -0.00005
*
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8395.5 5.3581
*lcp 8400.0 5.3383
*lcp 8411.5 5.2875
*lcp 8427.5 5.1992
*lcp 8443.5 5.1315
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8395.5 4.6050
*rcp 8400.0 4.4970
*rcp 8411.5 4.5280
*rcp 8427.5 4.5320
*rcp 8443.5 4.5210
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2008 08 08
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*ELEV POLY 0.966 0.0021 -0.00006
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8400    5.7
*lcp 8420    7.3
*lcp 8440    5.4
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8400    4.0
*rcp 8420    4.5
*rcp 8440    5.3
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2011 08 16
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*Astronomy Curve ??
*ELEV POLY 0.966 0.0021 -0.00006   
* Geodesy curve:
*ELEV POLY 0.94 0.0035 -0.00005
*
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8395.5 5.3581
*lcp 8400.0 5.3383
*lcp 8411.5 5.2875
*lcp 8427.5 5.1992
*lcp 8443.5 5.1315
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8217.0 4.4433
*rcp 8257.0 4.5540
*rcp 8357.0 4.4156
*rcp 8400.0 4.5839
*rcp 8517.0 4.6351
*rcp 8737.0 4.5517
*rcp 8857.0 4.6412
*rcp 8917.0 4.6722
*rcp 8937.0 4.6612
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2008 08 08
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*ELEV POLY 0.966 0.0021 -0.00006
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8400    5.7
*lcp 8420    7.3
*lcp 8440    5.4
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8400    4.0
*rcp 8420    4.5
*rcp 8440    5.3
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2011 03 14
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*Astronomy Curve ??
*ELEV POLY 0.966 0.0021 -0.00006   
* Geodesy curve:
*ELEV POLY 0.94 0.0035 -0.00005
*
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8395.5 5.3581
*lcp 8400.0 5.3383
*lcp 8411.5 5.2875
*lcp 8427.5 5.1992
*lcp 8443.5 5.1315
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8395.5 4.6050
*rcp 8400.0 4.4970
*rcp 8411.5 4.5280
*rcp 8427.5 4.5320
*rcp 8443.5 4.5210
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table
* x.rx - x band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then one or two fixed value
* frequencies in MHz
*
*fixed 7650 8100
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2008 08 08
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*0.22 0.22
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ... [opacity_corrected]
*
* FORM = POLY only for now
* TYPE - ELEV and ALTAZ only for now
* COEFFICENTS - variable number of number values
* opacity_corrected - optional final field, if present it indicates that
*                     the curve is opacity corrected
*
* maximum coefficents 10
*
*ELEV POLY 0.966 0.0021 -0.00006
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_tcal_table
*
*     MAXIMUM ENTRIES 400, group by polarization
*                          then sorted by increasing freq
*
*lcp 8160    5.8
*lcp 8180    5.1
*lcp 8200    6.6
*lcp 8220    4.2
*lcp 8240    4.6
*lcp 8260    6.8
*lcp 8280    6.1
*lcp 8300    5.4
*lcp 8320    7.5
*lcp 8340    6.2
*lcp 8360    5.9
*lcp 8380    5.4
*lcp 8400    5.7
*lcp 8420    7.3
*lcp 8440    5.4
*lcp 8460    4.9
*lcp 8480    4.0
*lcp 8500    6.3
*lcp 8520    5.8
*lcp 8540    7.0
*lcp 8560    6.6
*lcp 8580    4.4
*lcp 8600    4.9
*lcp 8620    6.6
*lcp 8640    4.4
*lcp 8660    8.4
*lcp 8680    6.6
*lcp 8700    5.0
*lcp 8720    6.7
*lcp 8740    6.0
*lcp 8760    7.2
*lcp 8780    8.4
*lcp 8800    5.1
*lcp 8820    7.4
*lcp 8840    6.4
*lcp 8860    6.4
*lcp 8880    5.4
*lcp 8900    5.4
*lcp 8920    6.9
*lcp 8940    6.3
*lcp 8960    4.7
*lcp 8980    6.8
*rcp 8160    5.5
*rcp 8180    2.6
*rcp 8200    4.9
*rcp 8220    6.6
*rcp 8240    6.3
*rcp 8260    3.8
*rcp 8280    6.0
*rcp 8300    5.0
*rcp 8320    6.0
*rcp 8340    4.0
*rcp 8360    4.6
*rcp 8380    4.0
*rcp 8400    4.0
*rcp 8420    4.5
*rcp 8440    5.3
*rcp 8460    5.5
*rcp 8480    4.8
*rcp 8500    5.5
*rcp 8520    4.5
*rcp 8540    4.9
*rcp 8560    3.5
*rcp 8580    5.8
*rcp 8600    6.1
*rcp 8620    5.9
*rcp 8640    5.4
*rcp 8660    4.1
*rcp 8680    5.7
*rcp 8700    5.2
*rcp 8720    6.7
*rcp 8740    6.6
*rcp 8760    6.3
*rcp 8780    3.2
*rcp 8800    5.4
*rcp 8820    5.3
*rcp 8840    6.4
*rcp 8860    6.7
*rcp 8880    5.4
*rcp 8900    6.8
*rcp 8920    5.3
*rcp 8940    4.2
*rcp 8960    4.4
*rcp 8980    6.2
*end_tcal_table
*
* Trec: receiver temperature
*
*8.0
*
* Spill over table
*
* 9th and following lines: Spillover versus frequency
*     Format: Elevation Tspill
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     ends with a line containing end_spillover_table
*
*     MAXIMUM ENTRIES 20
*end_spillover_table