* x.rx - x band receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * fixed 8080 8580.1 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * 2013 06 19 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * rcp lcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * Changed to 0.050 after session 1, 2008. Used to be 0.055 0.050 0.050 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * ELEV POLY 8.10563E-01 9.74073E-03 -2.33249E-04 3.46868E-06 -2.13463E-08 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * rcp 8195.0 18.6090 rcp 8211.0 17.9515 rcp 8212.0 20.5820 rcp 8236.0 18.9910 rcp 8260.0 17.5370 rcp 8324.0 16.6540 rcp 8330.0 23.5040 rcp 8340.0 23.5040 rcp 8340.5 23.5040 rcp 8347.5 23.8240 rcp 8367.5 25.3830 rcp 8375.5 23.6630 rcp 8407.5 23.1665 rcp 8420.0 23.3860 rcp 8436.0 22.9300 rcp 8439.5 22.8140 rcp 8452.0 22.5610 rcp 8471.5 22.3830 rcp 8504.0 21.2570 rcp 8507.5 22.3040 rcp 8539.5 22.9850 rcp 8571.5 23.5810 rcp 8580.0 13.9300 lcp 8195.0 18.6090 lcp 8211.0 17.9515 lcp 8212.0 20.5820 lcp 8236.0 18.9910 lcp 8260.0 17.5370 lcp 8324.0 22.2825 lcp 8367.5 23.2380 lcp 8375.5 24.2740 lcp 8407.5 23.6030 lcp 8420.0 22.3240 lcp 8436.0 20.7540 lcp 8439.5 20.6080 lcp 8452.0 20.6400 lcp 8471.5 20.0160 lcp 8504.0 19.7270 lcp 8508.0 15.8670 lcp 8548.0 14.1140 lcp 8580.0 13.9300 * *tcal table ends with end_tcal_table record * end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * 0.0 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * end_spillover_table