* * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * 2008 03 26 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * 0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * lcp 6500.0 16.4 lcp 6550.0 16.4 lcp 6600.0 16.4 lcp 6618.0 25.7966 lcp 6620.0 25.5074 lcp 6622.0 24.8004 lcp 6624.0 24.3718 lcp 6626.0 24.2527 lcp 6628.0 24.1579 lcp 6630.0 23.6133 lcp 6632.0 22.9986 lcp 6634.0 23.2040 lcp 6636.0 21.7849 lcp 6638.0 21.4805 lcp 6640.0 21.4437 lcp 6642.0 21.4073 lcp 6644.0 20.7522 lcp 6646.0 20.4368 lcp 6648.0 20.2516 lcp 6650.0 19.2038 lcp 6652.0 18.9307 lcp 6654.0 18.3744 lcp 6656.0 18.1169 lcp 6658.0 17.6002 lcp 6660.0 17.1232 lcp 6662.0 16.7949 lcp 6664.0 15.7456 lcp 6666.0 15.4312 lcp 6668.0 15.1786 lcp 6670.0 15.0093 lcp 6672.0 14.8092 lcp 6674.0 14.8731 lcp 6676.0 14.9717 lcp 6678.0 14.4887 lcp 6680.0 14.3871 lcp 6682.0 14.5771 lcp 6684.0 14.7605 lcp 6686.0 14.5443 lcp 6688.0 14.4485 lcp 6690.0 14.7880 lcp 6692.0 14.1139 lcp 6694.0 14.3631 lcp 6696.0 14.4616 lcp 6698.0 14.2493 lcp 6700.0 14.1666 lcp 6702.0 14.0587 lcp 6704.0 14.1236 lcp 6706.0 13.7225 lcp 6708.0 13.6097 lcp 6710.0 13.4273 lcp 6712.0 13.6114 lcp 6714.0 13.7466 lcp 6810.0 20.4330 lcp 6850.0 16.4 * rcp 6500.0 20.9 rcp 6550.0 20.9 rcp 6600.0 20.9 rcp 6618.0 22.6593 rcp 6620.0 23.0933 rcp 6622.0 22.9504 rcp 6624.0 22.7374 rcp 6626.0 23.2025 rcp 6628.0 22.9688 rcp 6630.0 22.8723 rcp 6632.0 22.8522 rcp 6634.0 22.6441 rcp 6636.0 21.3431 rcp 6638.0 20.8962 rcp 6640.0 21.3841 rcp 6642.0 21.0628 rcp 6644.0 21.0487 rcp 6646.0 21.8043 rcp 6648.0 22.6836 rcp 6650.0 22.4870 rcp 6652.0 22.4192 rcp 6654.0 22.8725 rcp 6656.0 22.3246 rcp 6658.0 22.3512 rcp 6660.0 21.8663 rcp 6662.0 21.1071 rcp 6664.0 19.5716 rcp 6666.0 19.0273 rcp 6668.0 18.6436 rcp 6670.0 18.2663 rcp 6672.0 17.7565 rcp 6674.0 17.5985 rcp 6676.0 17.4711 rcp 6678.0 16.5795 rcp 6680.0 16.6545 rcp 6682.0 16.9456 rcp 6684.0 17.1602 rcp 6686.0 17.2504 rcp 6688.0 17.7232 rcp 6690.0 17.9162 rcp 6692.0 17.1984 rcp 6694.0 17.1650 rcp 6696.0 17.8207 rcp 6698.0 17.7422 rcp 6700.0 17.8921 rcp 6702.0 17.5245 rcp 6704.0 17.8497 rcp 6706.0 17.0129 rcp 6708.0 16.8842 rcp 6710.0 17.3013 rcp 6712.0 16.9485 rcp 6714.0 17.0361 rcp 6810.0 19.4641 rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2007 03 29 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table