*
* calhhs.rxg - HartRAO 13.0cm S band receiver parameter definition
* (Dichroic installed - only a rough RCP calibration)
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then the fixed value
* frequencies in MHz
*
* WB fixed LO 2020 MHz
* NB tuneable LO range 2065-2215 MHz
*
*fixed 2020
range 2020 2215
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
2008 09 02
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
0.00000 0.038515
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ...
*
* FORM = POLY only for now
* TYPE - ELEV or ALTAZ only for now
* COEFFICENTS - variable number of number values
*
* maximum coefficents 10
*
ELEV POLY 0.76882541 0.012741498 -0.0001755662
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     MAXIMUM ENTRIES 100, group by polarization
*                          then sorted by increasing freq
*
lcp 2100.0 19.0
lcp 2200.0 19.0
lcp 2300.0 19.0
lcp 2400.0 19.0
lcp 2500.0 19.0
*
rcp 2100.0 16.4
rcp 2200.0 16.4
rcp 2208.0 15.7823
rcp 2212.0 16.2790
rcp 2216.0 16.5169
rcp 2220.0 16.7333
rcp 2224.0 16.2256
rcp 2228.0 16.5068
rcp 2232.0 16.7267
rcp 2236.0 16.9062
rcp 2240.0 16.8044
rcp 2244.0 17.2176
rcp 2248.0 16.9961
rcp 2252.0 17.3716
rcp 2256.0 17.6015
rcp 2260.0 16.9588
rcp 2264.0 17.3067
rcp 2268.0 17.4141
rcp 2272.0 16.3078
rcp 2276.0 16.0410
rcp 2280.0 15.4823
rcp 2284.0 15.6837
rcp 2288.0 15.1577
rcp 2292.0 15.5706
rcp 2296.0 15.2571
rcp 2300.0 15.1075
rcp 2304.0 14.9719
rcp 2308.0 15.2070
rcp 2312.0 14.7889
rcp 2316.0 15.1853
rcp 2320.0 15.9862
rcp 2324.0 14.8294
rcp 2328.0 14.1477
rcp 2332.0 14.4611
rcp 2336.0 14.4999
rcp 2340.0 14.4428
rcp 2344.0 13.8724
rcp 2348.0 13.8598
rcp 2352.0 13.4053
rcp 2356.0 13.9180
rcp 2360.0 13.8452
rcp 2364.0 13.8650
rcp 2368.0 13.4242
rcp 2372.0 13.9631
rcp 2376.0 14.2964
rcp 2380.0 14.8222
rcp 2384.0 15.2074
rcp 2388.0 16.5276
rcp 2392.0 16.3562
rcp 2396.0 16.7347
rcp 2400.0 15.8758
rcp 2404.0 15.4156
rcp 2408.0 15.1136
rcp 2412.0 16.2221
rcp 2416.0 16.8920
rcp 2420.0 17.1404
rcp 2424.0 18.1463
rcp 2428.0 18.5999
rcp 2432.0 20.4155
rcp 2436.0 20.6054
rcp 2440.0 20.8330
rcp 2444.0 21.0235
rcp 2448.0 21.2830
rcp 2452.0 21.4672
rcp 2456.0 21.6206
rcp 2460.0 21.8173
rcp 2464.0 22.0070
rcp 2468.0 22.2235
rcp 2472.0 22.4150
rcp 2476.0 22.6589
rcp 2480.0 22.8769
rcp 2484.0 23.0360
rcp 2500.0 16.4
*
*tcal table ends with end_tcal_table record
*
end_tcal_table
*
* Trec - receiver temperature, degrees K
*
* if value is zero, no opacity corrections are used
*
 0.0
*
* Spillover table
*
* format:
* elevation temperature
* where:
*  elevation is angular degrees above horizon
*  temperature is Kelvin degrees of spillover noise
*
*spillover table ends with end_spillover_table record
*
end_spillover_table
*
* calhhs.rxg - HartRAO 13.0cm S band receiver parameter definition
*
* first line: LO values and ranges, format:
*  type   frequencies
* if type is range, the two values: lower and upper frequencies
* if type is fixed, then the fixed value
* frequencies in MHz
*
* WB fixed LO 2020 MHz
* NB tuneable LO range 2065-2215 MHz
*
*fixed 2020
*range 2020 2215
*
* 2nd line: creation date
* format:  yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up)
*
*2002 10 30
*
* 3rd line: FWHM beamwidthm format:
*   model value
*
* if type is frequncy, then fwhm=value*1.22*c/(freq*diameter)
*                      value is 1.0 if omitted
* if type is constant, then fwhm=value (degrees)
*
*frequency 1.0
*
* 4th line polarizations available
*
* one of both of lcp and rcp
*
*lcp rcp
*
* 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order
*
*  0.10288  0.10288
*
* 6th line: gain curve (only one) for ALL polarizations in 4th line
* TYPE FORM COEFFICENTS ...
*
* FORM = POLY only for now
* TYPE - ELEV or ALTAZ only for now
* COEFFICENTS - variable number of number values
*
* maximum coefficents 10
*
*ALTAZ POLY 1.00  0.0001739  -1.412E-5  3.289E-7  -2.939E-9
*
* 7th and following lines: tcal versus frequency
*     Format: POL FREQ TCAL
*     where:
*            POL    polarization rcp or lcp
*            FREQ   frequency (MHz)
*            TCAL   degrees K
*
*     MAXIMUM ENTRIES 100, group by polarization
*                          then sorted by increasing freq
*
*lcp 2100.0 19.0
*lcp 2200.0 19.0
*lcp 2300.0 19.0
*lcp 2400.0 19.0
*lcp 2500.0 19.0
*
*rcp 2100.0 16.4
*rcp 2200.0 16.4
*rcp 2300.0 16.4
*rcp 2400.0 16.4
*rcp 2500.0 16.4
*
*tcal table ends with end_tcal_table record
*
*end_tcal_table
*
* Trec - receiver temperature, degrees K
*
* if value is zero, no opacity corrections are used
*
* 0.0
*
* Spillover table
*
* format:
* elevation temperature
* where:
*  elevation is angular degrees above horizon
*  temperature is Kelvin degrees of spillover noise
*
*spillover table ends with end_spillover_table record
*
*end_spillover_table