* * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * 2011 03 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * 0.0869 0.0858 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * lcp 6500.0 16.4 lcp 6550.0 16.4 lcp 6600.0 16.4 lcp 6618.0 26.4287 lcp 6620.0 26.0144 lcp 6622.0 25.3766 lcp 6624.0 25.1466 lcp 6626.0 24.1350 lcp 6628.0 23.8184 lcp 6630.0 23.1651 lcp 6632.0 22.2733 lcp 6634.0 21.9567 lcp 6636.0 21.1516 lcp 6638.0 21.0722 lcp 6640.0 20.3247 lcp 6642.0 20.1066 lcp 6644.0 19.6998 lcp 6646.0 18.9702 lcp 6648.0 18.6854 lcp 6650.0 18.1318 lcp 6652.0 18.0097 lcp 6654.0 17.4336 lcp 6656.0 17.2867 lcp 6658.0 17.1186 lcp 6660.0 16.8020 lcp 6662.0 16.8523 lcp 6664.0 16.3782 lcp 6666.0 16.2712 lcp 6668.0 15.7461 lcp 6670.0 15.6217 lcp 6672.0 15.3438 lcp 6674.0 14.9008 lcp 6676.0 14.8761 lcp 6678.0 14.5834 lcp 6680.0 14.7517 lcp 6682.0 14.4351 lcp 6684.0 14.4319 lcp 6686.0 14.4890 lcp 6688.0 14.3393 lcp 6690.0 14.4045 lcp 6692.0 14.1740 lcp 6694.0 14.3823 lcp 6696.0 14.2089 lcp 6698.0 14.3501 lcp 6700.0 14.4471 lcp 6702.0 14.2985 lcp 6704.0 14.4090 lcp 6706.0 14.3099 lcp 6708.0 14.5389 lcp 6710.0 14.3359 lcp 6712.0 14.3620 lcp 6714.0 14.5911 lcp 6810.0 21.9716 lcp 6850.0 16.4 * rcp 6500.0 20.9 rcp 6550.0 20.9 rcp 6600.0 20.9 rcp 6618.0 23.2940 rcp 6620.0 23.8050 rcp 6622.0 23.5820 rcp 6624.0 24.1280 rcp 6626.0 23.6070 rcp 6628.0 23.5510 rcp 6630.0 23.0550 rcp 6632.0 22.4750 rcp 6634.0 22.1900 rcp 6636.0 21.2860 rcp 6638.0 20.9160 rcp 6640.0 20.1910 rcp 6642.0 20.2640 rcp 6644.0 20.3920 rcp 6646.0 20.3230 rcp 6648.0 20.7700 rcp 6650.0 20.9590 rcp 6652.0 21.5500 rcp 6654.0 21.2620 rcp 6656.0 21.4580 rcp 6658.0 20.8920 rcp 6660.0 20.0930 rcp 6662.0 19.7320 rcp 6664.0 18.7810 rcp 6666.0 18.3360 rcp 6668.0 17.7280 rcp 6670.0 17.8240 rcp 6672.0 17.7520 rcp 6674.0 17.6750 rcp 6676.0 17.8340 rcp 6678.0 17.5840 rcp 6680.0 18.0040 rcp 6682.0 17.7200 rcp 6684.0 17.8690 rcp 6686.0 17.8530 rcp 6688.0 17.9100 rcp 6690.0 17.9990 rcp 6692.0 17.7210 rcp 6694.0 17.7360 rcp 6696.0 17.4920 rcp 6698.0 17.5550 rcp 6700.0 17.5710 rcp 6702.0 17.3580 rcp 6704.0 17.5450 rcp 6706.0 17.2260 rcp 6708.0 17.2590 rcp 6710.0 17.0520 rcp 6712.0 17.2630 rcp 6714.0 17.4840 rcp 6810.0 20.2265 rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2007 03 29 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2008 03 26 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 25.7966 *lcp 6620.0 25.5074 *lcp 6622.0 24.8004 *lcp 6624.0 24.3718 *lcp 6626.0 24.2527 *lcp 6628.0 24.1579 *lcp 6630.0 23.6133 *lcp 6632.0 22.9986 *lcp 6634.0 23.2040 *lcp 6636.0 21.7849 *lcp 6638.0 21.4805 *lcp 6640.0 21.4437 *lcp 6642.0 21.4073 *lcp 6644.0 20.7522 *lcp 6646.0 20.4368 *lcp 6648.0 20.2516 *lcp 6650.0 19.2038 *lcp 6652.0 18.9307 *lcp 6654.0 18.3744 *lcp 6656.0 18.1169 *lcp 6658.0 17.6002 *lcp 6660.0 17.1232 *lcp 6662.0 16.7949 *lcp 6664.0 15.7456 *lcp 6666.0 15.4312 *lcp 6668.0 15.1786 *lcp 6670.0 15.0093 *lcp 6672.0 14.8092 *lcp 6674.0 14.8731 *lcp 6676.0 14.9717 *lcp 6678.0 14.4887 *lcp 6680.0 14.3871 *lcp 6682.0 14.5771 *lcp 6684.0 14.7605 *lcp 6686.0 14.5443 *lcp 6688.0 14.4485 *lcp 6690.0 14.7880 *lcp 6692.0 14.1139 *lcp 6694.0 14.3631 *lcp 6696.0 14.4616 *lcp 6698.0 14.2493 *lcp 6700.0 14.1666 *lcp 6702.0 14.0587 *lcp 6704.0 14.1236 *lcp 6706.0 13.7225 *lcp 6708.0 13.6097 *lcp 6710.0 13.4273 *lcp 6712.0 13.6114 *lcp 6714.0 13.7466 *lcp 6810.0 20.4330 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 22.6593 *rcp 6620.0 23.0933 *rcp 6622.0 22.9504 *rcp 6624.0 22.7374 *rcp 6626.0 23.2025 *rcp 6628.0 22.9688 *rcp 6630.0 22.8723 *rcp 6632.0 22.8522 *rcp 6634.0 22.6441 *rcp 6636.0 21.3431 *rcp 6638.0 20.8962 *rcp 6640.0 21.3841 *rcp 6642.0 21.0628 *rcp 6644.0 21.0487 *rcp 6646.0 21.8043 *rcp 6648.0 22.6836 *rcp 6650.0 22.4870 *rcp 6652.0 22.4192 *rcp 6654.0 22.8725 *rcp 6656.0 22.3246 *rcp 6658.0 22.3512 *rcp 6660.0 21.8663 *rcp 6662.0 21.1071 *rcp 6664.0 19.5716 *rcp 6666.0 19.0273 *rcp 6668.0 18.6436 *rcp 6670.0 18.2663 *rcp 6672.0 17.7565 *rcp 6674.0 17.5985 *rcp 6676.0 17.4711 *rcp 6678.0 16.5795 *rcp 6680.0 16.6545 *rcp 6682.0 16.9456 *rcp 6684.0 17.1602 *rcp 6686.0 17.2504 *rcp 6688.0 17.7232 *rcp 6690.0 17.9162 *rcp 6692.0 17.1984 *rcp 6694.0 17.1650 *rcp 6696.0 17.8207 *rcp 6698.0 17.7422 *rcp 6700.0 17.8921 *rcp 6702.0 17.5245 *rcp 6704.0 17.8497 *rcp 6706.0 17.0129 *rcp 6708.0 16.8842 *rcp 6710.0 17.3013 *rcp 6712.0 16.9485 *rcp 6714.0 17.0361 *rcp 6810.0 19.4641 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2007 03 29 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table