* * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * 2011 06 24 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequency, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * 0.088676 0.0886 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * ELEV POLY 0.59194034 0.0055738457 -1.1553883e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * lcp 6500.0 16.4 lcp 6550.0 16.4 lcp 6600.0 16.4 lcp 6618.0 27.2860 lcp 6620.0 26.5902 lcp 6622.0 26.0005 lcp 6624.0 25.3080 lcp 6626.0 24.4743 lcp 6628.0 23.6147 lcp 6630.0 22.8499 lcp 6632.0 22.1665 lcp 6634.0 21.6696 lcp 6636.0 21.3060 lcp 6638.0 21.0009 lcp 6640.0 20.8364 lcp 6642.0 20.5082 lcp 6644.0 20.2095 lcp 6646.0 19.5958 lcp 6648.0 19.0451 lcp 6650.0 18.5805 lcp 6652.0 18.1455 lcp 6654.0 17.5684 lcp 6656.0 17.0522 lcp 6658.0 16.6994 lcp 6660.0 16.5634 lcp 6662.0 16.4610 lcp 6664.0 16.2569 lcp 6666.0 16.0615 lcp 6668.0 15.8297 lcp 6670.0 15.5929 lcp 6672.0 15.3712 lcp 6674.0 15.1961 lcp 6676.0 15.0173 lcp 6678.0 14.7804 lcp 6680.0 14.6788 lcp 6682.0 14.5631 lcp 6684.0 14.3891 lcp 6686.0 14.2868 lcp 6688.0 14.1531 lcp 6690.0 14.0044 lcp 6692.0 13.9991 lcp 6694.0 14.0329 lcp 6696.0 14.1095 lcp 6698.0 14.1789 lcp 6700.0 14.3229 lcp 6702.0 14.3476 lcp 6704.0 14.4074 lcp 6706.0 14.4061 lcp 6708.0 14.4499 lcp 6710.0 14.4307 lcp 6712.0 14.2430 lcp 6714.0 14.1377 lcp 6810.0 21.2756 lcp 6850.0 16.4 * rcp 6500.0 20.9 rcp 6550.0 20.9 rcp 6600.0 20.9 rcp 6618.0 23.1249 rcp 6620.0 23.3620 rcp 6622.0 23.7282 rcp 6624.0 23.8347 rcp 6626.0 23.7823 rcp 6628.0 23.3330 rcp 6630.0 22.8316 rcp 6632.0 22.5099 rcp 6634.0 21.9863 rcp 6636.0 21.5416 rcp 6638.0 21.0906 rcp 6640.0 20.7941 rcp 6642.0 20.4755 rcp 6644.0 20.5019 rcp 6646.0 20.7077 rcp 6648.0 20.8903 rcp 6650.0 21.4122 rcp 6652.0 21.7177 rcp 6654.0 21.6155 rcp 6656.0 21.1044 rcp 6658.0 20.5151 rcp 6660.0 20.0510 rcp 6662.0 19.3468 rcp 6664.0 18.7427 rcp 6666.0 18.1114 rcp 6668.0 17.9637 rcp 6670.0 17.8378 rcp 6672.0 17.8842 rcp 6674.0 17.9691 rcp 6676.0 18.0007 rcp 6678.0 17.9688 rcp 6680.0 18.1020 rcp 6682.0 18.1156 rcp 6684.0 17.9873 rcp 6686.0 17.8570 rcp 6688.0 17.8791 rcp 6690.0 17.6899 rcp 6692.0 17.4971 rcp 6694.0 17.4386 rcp 6696.0 17.4699 rcp 6698.0 17.2933 rcp 6700.0 17.1824 rcp 6702.0 17.1396 rcp 6704.0 17.1808 rcp 6706.0 17.2711 rcp 6708.0 17.3510 rcp 6710.0 17.4164 rcp 6712.0 17.3342 rcp 6714.0 17.5077 rcp 6810.0 20.0135 rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2011 03 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0869 0.0858 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 26.4287 *lcp 6620.0 26.0144 *lcp 6622.0 25.3766 *lcp 6624.0 25.1466 *lcp 6626.0 24.1350 *lcp 6628.0 23.8184 *lcp 6630.0 23.1651 *lcp 6632.0 22.2733 *lcp 6634.0 21.9567 *lcp 6636.0 21.1516 *lcp 6638.0 21.0722 *lcp 6640.0 20.3247 *lcp 6642.0 20.1066 *lcp 6644.0 19.6998 *lcp 6646.0 18.9702 *lcp 6648.0 18.6854 *lcp 6650.0 18.1318 *lcp 6652.0 18.0097 *lcp 6654.0 17.4336 *lcp 6656.0 17.2867 *lcp 6658.0 17.1186 *lcp 6660.0 16.8020 *lcp 6662.0 16.8523 *lcp 6664.0 16.3782 *lcp 6666.0 16.2712 *lcp 6668.0 15.7461 *lcp 6670.0 15.6217 *lcp 6672.0 15.3438 *lcp 6674.0 14.9008 *lcp 6676.0 14.8761 *lcp 6678.0 14.5834 *lcp 6680.0 14.7517 *lcp 6682.0 14.4351 *lcp 6684.0 14.4319 *lcp 6686.0 14.4890 *lcp 6688.0 14.3393 *lcp 6690.0 14.4045 *lcp 6692.0 14.1740 *lcp 6694.0 14.3823 *lcp 6696.0 14.2089 *lcp 6698.0 14.3501 *lcp 6700.0 14.4471 *lcp 6702.0 14.2985 *lcp 6704.0 14.4090 *lcp 6706.0 14.3099 *lcp 6708.0 14.5389 *lcp 6710.0 14.3359 *lcp 6712.0 14.3620 *lcp 6714.0 14.5911 *lcp 6810.0 21.9716 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 23.2940 *rcp 6620.0 23.8050 *rcp 6622.0 23.5820 *rcp 6624.0 24.1280 *rcp 6626.0 23.6070 *rcp 6628.0 23.5510 *rcp 6630.0 23.0550 *rcp 6632.0 22.4750 *rcp 6634.0 22.1900 *rcp 6636.0 21.2860 *rcp 6638.0 20.9160 *rcp 6640.0 20.1910 *rcp 6642.0 20.2640 *rcp 6644.0 20.3920 *rcp 6646.0 20.3230 *rcp 6648.0 20.7700 *rcp 6650.0 20.9590 *rcp 6652.0 21.5500 *rcp 6654.0 21.2620 *rcp 6656.0 21.4580 *rcp 6658.0 20.8920 *rcp 6660.0 20.0930 *rcp 6662.0 19.7320 *rcp 6664.0 18.7810 *rcp 6666.0 18.3360 *rcp 6668.0 17.7280 *rcp 6670.0 17.8240 *rcp 6672.0 17.7520 *rcp 6674.0 17.6750 *rcp 6676.0 17.8340 *rcp 6678.0 17.5840 *rcp 6680.0 18.0040 *rcp 6682.0 17.7200 *rcp 6684.0 17.8690 *rcp 6686.0 17.8530 *rcp 6688.0 17.9100 *rcp 6690.0 17.9990 *rcp 6692.0 17.7210 *rcp 6694.0 17.7360 *rcp 6696.0 17.4920 *rcp 6698.0 17.5550 *rcp 6700.0 17.5710 *rcp 6702.0 17.3580 *rcp 6704.0 17.5450 *rcp 6706.0 17.2260 *rcp 6708.0 17.2590 *rcp 6710.0 17.0520 *rcp 6712.0 17.2630 *rcp 6714.0 17.4840 *rcp 6810.0 20.2265 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2007 03 29 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2008 03 26 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 25.7966 *lcp 6620.0 25.5074 *lcp 6622.0 24.8004 *lcp 6624.0 24.3718 *lcp 6626.0 24.2527 *lcp 6628.0 24.1579 *lcp 6630.0 23.6133 *lcp 6632.0 22.9986 *lcp 6634.0 23.2040 *lcp 6636.0 21.7849 *lcp 6638.0 21.4805 *lcp 6640.0 21.4437 *lcp 6642.0 21.4073 *lcp 6644.0 20.7522 *lcp 6646.0 20.4368 *lcp 6648.0 20.2516 *lcp 6650.0 19.2038 *lcp 6652.0 18.9307 *lcp 6654.0 18.3744 *lcp 6656.0 18.1169 *lcp 6658.0 17.6002 *lcp 6660.0 17.1232 *lcp 6662.0 16.7949 *lcp 6664.0 15.7456 *lcp 6666.0 15.4312 *lcp 6668.0 15.1786 *lcp 6670.0 15.0093 *lcp 6672.0 14.8092 *lcp 6674.0 14.8731 *lcp 6676.0 14.9717 *lcp 6678.0 14.4887 *lcp 6680.0 14.3871 *lcp 6682.0 14.5771 *lcp 6684.0 14.7605 *lcp 6686.0 14.5443 *lcp 6688.0 14.4485 *lcp 6690.0 14.7880 *lcp 6692.0 14.1139 *lcp 6694.0 14.3631 *lcp 6696.0 14.4616 *lcp 6698.0 14.2493 *lcp 6700.0 14.1666 *lcp 6702.0 14.0587 *lcp 6704.0 14.1236 *lcp 6706.0 13.7225 *lcp 6708.0 13.6097 *lcp 6710.0 13.4273 *lcp 6712.0 13.6114 *lcp 6714.0 13.7466 *lcp 6810.0 20.4330 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 22.6593 *rcp 6620.0 23.0933 *rcp 6622.0 22.9504 *rcp 6624.0 22.7374 *rcp 6626.0 23.2025 *rcp 6628.0 22.9688 *rcp 6630.0 22.8723 *rcp 6632.0 22.8522 *rcp 6634.0 22.6441 *rcp 6636.0 21.3431 *rcp 6638.0 20.8962 *rcp 6640.0 21.3841 *rcp 6642.0 21.0628 *rcp 6644.0 21.0487 *rcp 6646.0 21.8043 *rcp 6648.0 22.6836 *rcp 6650.0 22.4870 *rcp 6652.0 22.4192 *rcp 6654.0 22.8725 *rcp 6656.0 22.3246 *rcp 6658.0 22.3512 *rcp 6660.0 21.8663 *rcp 6662.0 21.1071 *rcp 6664.0 19.5716 *rcp 6666.0 19.0273 *rcp 6668.0 18.6436 *rcp 6670.0 18.2663 *rcp 6672.0 17.7565 *rcp 6674.0 17.5985 *rcp 6676.0 17.4711 *rcp 6678.0 16.5795 *rcp 6680.0 16.6545 *rcp 6682.0 16.9456 *rcp 6684.0 17.1602 *rcp 6686.0 17.2504 *rcp 6688.0 17.7232 *rcp 6690.0 17.9162 *rcp 6692.0 17.1984 *rcp 6694.0 17.1650 *rcp 6696.0 17.8207 *rcp 6698.0 17.7422 *rcp 6700.0 17.8921 *rcp 6702.0 17.5245 *rcp 6704.0 17.8497 *rcp 6706.0 17.0129 *rcp 6708.0 16.8842 *rcp 6710.0 17.3013 *rcp 6712.0 16.9485 *rcp 6714.0 17.0361 *rcp 6810.0 19.4641 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2007 03 29 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0847 0.0875 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 07 03 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6618.0 19.0529 *lcp 6620.0 18.5064 *lcp 6622.0 18.0527 *lcp 6624.0 17.6123 *lcp 6626.0 17.1496 *lcp 6628.0 16.7590 *lcp 6630.0 16.3998 *lcp 6632.0 16.1372 *lcp 6634.0 15.7155 *lcp 6636.0 15.4398 *lcp 6638.0 15.1370 *lcp 6640.0 14.6632 *lcp 6642.0 14.4061 *lcp 6644.0 14.1798 *lcp 6646.0 14.0493 *lcp 6648.0 13.8227 *lcp 6650.0 13.6859 *lcp 6652.0 13.7369 *lcp 6654.0 13.5756 *lcp 6656.0 13.4503 *lcp 6658.0 13.3134 *lcp 6660.0 13.2010 *lcp 6662.0 12.9848 *lcp 6664.0 12.8597 *lcp 6666.0 12.5006 *lcp 6668.0 11.9853 *lcp 6670.0 11.5995 *lcp 6672.0 11.2833 *lcp 6674.0 11.2019 *lcp 6676.0 11.2131 *lcp 6678.0 11.2549 *lcp 6680.0 11.4041 *lcp 6682.0 11.4655 *lcp 6684.0 11.7132 *lcp 6686.0 11.8513 *lcp 6688.0 12.0454 *lcp 6690.0 11.9794 *lcp 6692.0 12.0403 *lcp 6694.0 12.0306 *lcp 6696.0 12.0322 *lcp 6698.0 12.1661 *lcp 6700.0 12.1805 *lcp 6702.0 12.4468 *lcp 6704.0 12.5247 *lcp 6706.0 12.6318 *lcp 6708.0 12.6530 *lcp 6710.0 12.5448 *lcp 6712.0 12.5606 *lcp 6714.0 12.4547 *lcp 6810.0 16.4000 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6618.0 19.6673 *rcp 6620.0 19.9819 *rcp 6622.0 20.0176 *rcp 6624.0 19.7161 *rcp 6626.0 19.5053 *rcp 6628.0 19.4157 *rcp 6630.0 19.4345 *rcp 6632.0 19.4992 *rcp 6634.0 19.6152 *rcp 6636.0 19.6536 *rcp 6638.0 19.6317 *rcp 6640.0 19.5526 *rcp 6642.0 19.6500 *rcp 6644.0 19.6923 *rcp 6646.0 19.7728 *rcp 6648.0 20.0771 *rcp 6650.0 20.5801 *rcp 6652.0 21.3788 *rcp 6654.0 22.3266 *rcp 6656.0 22.6512 *rcp 6658.0 22.8558 *rcp 6660.0 22.7781 *rcp 6662.0 22.7055 *rcp 6664.0 22.4828 *rcp 6666.0 21.6840 *rcp 6668.0 20.8197 *rcp 6670.0 20.2163 *rcp 6672.0 19.9666 *rcp 6674.0 19.9209 *rcp 6676.0 20.0687 *rcp 6678.0 20.0728 *rcp 6680.0 20.0710 *rcp 6682.0 20.2393 *rcp 6684.0 20.4201 *rcp 6686.0 20.6047 *rcp 6688.0 20.8401 *rcp 6690.0 21.1390 *rcp 6692.0 21.3880 *rcp 6694.0 21.5305 *rcp 6696.0 21.8632 *rcp 6698.0 21.9919 *rcp 6700.0 22.0712 *rcp 6702.0 22.2744 *rcp 6704.0 22.3528 *rcp 6706.0 22.3141 *rcp 6708.0 22.2639 *rcp 6710.0 22.1096 *rcp 6712.0 22.0025 *rcp 6714.0 22.0846 *rcp 6810.0 20.9142 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2006 03 10 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 16.4 *lcp 6550.0 16.4 *lcp 6600.0 16.4 *lcp 6650.0 16.4 *lcp 6662.5 12.7975 *lcp 6666.5 12.2169 *lcp 6670.5 11.6769 *lcp 6674.5 11.6815 *lcp 6678.5 11.6890 *lcp 6682.5 11.8922 *lcp 6686.5 12.1532 *lcp 6810.0 16.3813 *lcp 6850.0 16.4 * *rcp 6500.0 20.9 *rcp 6550.0 20.9 *rcp 6600.0 20.9 *rcp 6650.0 20.9 *rcp 6662.5 21.6359 *rcp 6666.5 20.7315 *rcp 6670.5 19.7376 *rcp 6674.5 19.8259 *rcp 6678.5 19.9407 *rcp 6682.5 20.1064 *rcp 6686.5 20.2799 *rcp 6810.0 20.9391 *rcp 6850.0 20.9 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2004 11 08 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0893 0.0893 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ELEV POLY 0.76586678 0.0071593031 -5.472912e-05 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.1926 *lcp 6666.5 13.5584 *lcp 6670.5 13.5808 *lcp 6674.5 13.8502 *lcp 6678.5 13.8590 *lcp 6682.5 13.8174 *lcp 6686.5 13.9186 *lcp 6850.0 14.2 * *rcp 6500.0 20.5025 *rcp 6550.0 20.5025 *rcp 6600.0 20.5025 *rcp 6650.0 20.5025 *rcp 6654.5 22.2143 *rcp 6658.5 21.4134 *rcp 6662.5 21.1985 *rcp 6666.5 21.0295 *rcp 6670.5 20.3158 *rcp 6674.5 20.4123 *rcp 6678.5 20.8093 *rcp 6682.5 21.2485 *rcp 6686.5 21.9761 *rcp 6850.0 20.5025 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table * * calhhm1.rxg - HartRAO 4.5cm Methanol receiver parameter definition * * first line: LO values and ranges, format: * type frequencies * if type is range, the two values: lower and upper frequencies * if type is fixed, then one or two fixed value * frequencies in MHz * * NB tuneable LO range 6400-6570 MHz * *range 6400 6570 * * 2nd line: creation date * format: yyyy ddd or yyyy mm dd (0 is valid for all for intial set-up) * *2003 07 09 * * 3rd line: FWHM beamwidthm format: * model value * * if type is frequncy, then fwhm=value*1.22*c/(freq*diameter) * value is 1.0 if omitted * if type is constant, then fwhm=value (degrees) * *frequency 1.0 * * 4th line polarizations available * * one of both of lcp and rcp * *lcp rcp * * 5th line: DPFU (degrees/Jansky) for polarizations in previous line in order * *0.0541 0.0360 * * 6th line: gain curve (only one) for ALL polarizations in 4th line * TYPE FORM COEFFICENTS ... * * FORM = POLY only for now * TYPE - ELEV and ALTAZ only for now * COEFFICENTS - variable number of number values * * maximum coefficents 10 * *ALTAZ POLY 1.00 0.0001739 -1.412E-5 3.289E-7 -2.939E-9 * * 7th and following lines: tcal versus frequency * Format: POL FREQ TCAL * where: * POL polarization rcp or lcp * FREQ frequency (MHz) * TCAL degrees K * * MAXIMUM ENTRIES 100, group by polarization * then sorted by increasing freq * *lcp 6500.0 14.2 *lcp 6550.0 14.2 *lcp 6600.0 14.2 *lcp 6650.0 14.2 *lcp 6654.5 14.9550 *lcp 6658.5 14.6695 *lcp 6662.5 14.4280 *lcp 6666.5 13.9319 *lcp 6670.5 13.6831 *lcp 6674.5 13.4906 *lcp 6678.5 13.3870 *lcp 6800.0 14.2 *lcp 6850.0 14.2 * *rcp 6500.0 14.2 *rcp 6550.0 14.2 *rcp 6600.0 14.2 *rcp 6650.0 14.2 *rcp 6654.5 15.3856 *rcp 6658.5 14.8309 *rcp 6662.5 15.2440 *rcp 6666.5 14.0233 *rcp 6670.5 13.6928 *rcp 6674.5 14.0057 *rcp 6678.5 14.1519 *rcp 6800.0 14.2 *rcp 6850.0 14.2 * * *tcal table ends with end_tcal_table record * *end_tcal_table * * Trec - receiver temperature, degrees K * * if value is zero, no opacity corrections are used * * 0.0 * * Spillover table * * format: * elevation temperature * where: * elevation is angular degrees above horizon * temperature is Kelvin degrees of spillover noise * *spillover table ends with end_spillover_table record * *end_spillover_table