! -------------------------------------------------------------------------------------------------------------------- ! -- Below four new entries are slightly tailored for EW014, see note entries ! -- The LO are chosen such that the redshifted 1612 line should fall near ! -- the LO, but enough far that BBC inputs are 100-230 MHz for those ! -- stations that lowpass this range at BBC IF. ! -- For Medicina the filtered BBC IF is assumed to cover 330-410 MHz, ! -- based on the mcOHlin and mc18cm original entries. ! lines: freqref = 1527,1527, 1577,1577, 1579,1579, 1629,1629 Name = ef1515jw Station = EFLSBERG priority = 5 ! Ef site: 1580-1725 ! Bandpass plot received: | lower -10dB@1500, -4dB@1526 || upper -2dB@1725,-8dB@1757 | rf1 = 1515, 1515 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1725, 1725 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1410.0, 1410.0 note = 'JWagner, updated after seeing rx bandpass plot' / Name = wb1515jw Station = WSTRBORK priority = 5 ! WSRT Guide: 1150-1750 rf1 = 1515, 1515 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1750, 1750 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1410.0, 1410.0 note = 'JWagner, WSRT Guide states 1150-1750' / Name = j1b1515jw Station = JODRELL1 priority = 5 ! EVN status: 1550-1730, BBC range 100-200 MHz rf1 = 1515, 1515 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 11730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1410.0, 1410.0 note 'JWagner, CygA z-OH 1526 discarded but 1576 1579 1629 retained' / Name = on21cm6jw Station = ONSALA85 priority = 6 ! Email: 1500-1720 rf1 = 1500, 1500 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1720, 1720 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1410, 1410 note = 'JWagner, after R.Hammergren mail that 21cm ok at 1500 MHz' / ! NGC 1068: freqref = 1606,1606, 1659,1659, 1661,1661, 1714,1714 Name = ef1498jw Station = EFLSBERG priority = 5 ! Ef site: 1580-1725 ! Bandpass plot received: | lower -10dB@1500, -4dB@1526 || upper -2dB@1725,-8dB@1757 | rf1 = 1515, 1515 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1825, 1825 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1498.0, 1498.0 note = 'JWagner, updated after seeing rx bandpass plot' / Name = wb1498jw Station = WSTRBORK priority = 5 ! WSRT Guide: 1150-1750 rf1 = 1530, 1530 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1498.0, 1498.0 note = 'JWagner, WSRT Guide states 1150-1750' / Name = j1b1498jw Station = JODRELL1 priority = 5 ! EVN status: 1550-1730, BBC range 100-200 MHz rf1 = 1550, 1550 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1498.0, 1498.0 note 'JWagner, N1068 z-OH lines 1606 1659 1661 kept ' / Name = on21cm6jw2 Station = ONSALA85 priority = 6 ! Email: 1500-1720 rf1 = 1530, 1530 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1745, 1745 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1498, 1498 note = 'JWagner, First LO shifted after R.Hammergren email and freqs.dat info that 18/21cm RX can go down to 1500' / Name = mcOHlin1268 Station = MEDICINA priority = 5 ! Mc site: 1595-1715 120MHz BW RF ! IF filter: 80 MHz BW covering 330..410 MHz ! LO range: restricted 1265-1305 ! Current sched v94 freq catalog entries cover 1599-1705 RF rf1 = 1595, 1595 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1715, 1715 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1268.0, 1268.0 note = 'JWagner, modified to match Mc site 1595-1715 RF and 80MHz IF' / ! -------------------------------------------------------------------------------------------------------------------- ! FREQUENCY CATALOG for SCHED. ! ! This file gives a selection of possible frequency setups for ! many active VLBI stations. For the VLBA, the selection is ! basicaly complete - nearly all valid setups are included. For ! other stations, many of the frequently used setups are included. ! SCHED can use this file to find the appropriate LO and IF settings ! given the desired observing frequencies. The user should not ! need to know the hardware setups at the various stations. In ! fact, users should avoid making their own frequency setups if ! possible. If the desired frequency is in this file, it won't ! be necessary to bother the station friends for information. And ! this file is kept reasonably up to date so it should be trusted ! more than information in old schedules. ! ! SCHED will also use this file to check against any user generated ! setups. If the user setup does not match one here, warnings will ! be issued as a flag that the user should make doubly sure that ! the setup is ok. ! ! The input parameters are: ! STATION Stations covered by this group. ! PRIOrity Lower values are favored groups. ! RF1 Lower limit of RF frequencies covered by this group. ! RF2 Upper RF limit. ! POL Polarization of this IF. ! LO1 The sum of all LOs other than the BBC. ! IFNAME The name of the IF as used by control software. ! FE The front end name (mainly VLBA). ! SYN The 3 VLBA front end synthesizer settings. ! DUALX Use the wide band X band system on the VLBA. ! CH1RF1 Lower hard RF limit for channel 1. Mainly for 2cm VLBA. ! CH1RF2 Upper hard RF limit for channel 1. These select filter. ! RCP50CM, LCP50CM 50 cm VLBA filter (NARROW or BROAD) ! ! VLA specific items. For the meaning of most, see the SCHED manual. ! CHNSTA Used to show if IF is phased array or single dish. (obsolete) ! VLABAND, VLABW, VLAFEAB, VLAFECD, VLASYNA, VLASYNB, FLUKEA, FLUKEB ! ! ! For each of the VLBA bands, a summary of significant filters and ! LO's is given in the comments. ! Receiver and filter ranges are to nominal 1/2 power points. ! The "maximum range" and "good range" are taken from examination of ! plots of measured data in VLBA Test Memo 51. These are subjective, ! eyeball estimates. Anyone attempting to schedule near the limits ! should look at Memo 51. ! The protected bands in the U.S., that are within VLA or VLBA ! bands, are (from VLA-VLBA Interference Memo No 3): ! 73.00 - 74.60 MHz Primary ! 322.00 - 328.60 Footnote (Primary is fixed and mobile) ! 608.00 - 614.00 Primary ! 1330.00 - 1350.00 Footnote (Primary is Aero navigation) ! 1350.00 - 1400.00 Footnotes for redshifted HI. ! 1400.00 - 1427.00 Primary ! 1610.60 - 1613.80 Secondary for OH. ! 1660.00 - 1670.00 Primary ! 1718.80 - 1722.20 Footnote ! 2290 - 2300 Space Research (DSN) ! 2640.00 - 2655.00 Space Research secondary ! 2655.00 - 2690.00 Secondary (Primary is broadcast satellite!) ! 2690.00 - 2700.00 Primary ! 4825.00 - 4835.00 Footnote ! 4950.00 - 4990.00 Footnote ! 4990.00 - 5000.00 Primary ! 8400 - 8450 Space Research (DSN) ! 14.47 - 14.50 GHz Footnotes ! 15.20 - 15.35 EES, Space Research secondary ! 15.35 - 15.40 Primary ! 21.20 - 21.40 EES, SR primary ! 22.01 - 22.21 Footnote ! 22.21 - 22.50 Primary ! 22.81 - 22.86 Footnote ! 23.07 - 23.12 Footnote ! 23.60 - 24.00 Primary ! 42.50 - 43.50 Primary ! 48.94 - 49.04 Primary ! 86.00 - 92.00 Primary ! ! The full frequency catalog (freq.dat) is maintained in subset files. ! All changes should be made in those files, not in freq.dat itself. ! Any changes made directly to freq.dat will be lost at the next update. ! ! This top information is contained in a file called ! Master_NRAO/freq_top.dat. ! ! ! Before 25mar97 - merge the NRAO and EVN versions Huib-03/97 ! 25mar97 split freq.dat into rcwfreq.dat and huibfreq.dat. ! 28Jul97 Various changes including VLA digital patch panel. ! 08Aug97 Some changes to EVN stations and GB 6cm. ! 09Oct97 Split rcwfreq.dat and huibfreq.dat into freq_VLBA.dat etc. ! .... History not maintained for a long time. ! 2004mar01 Rewrite some of above. Add 86 GHz VLBA frequencies. RCW. ! ! ---------------------------------------------------------------------- ! VERSION is the date and time when this catalog was ! assembled from the master subcatalogs. VERSION = "2010Nov23-20:55:34" !---------------- S-High (3-4 GHz) Rx ------------------------------ / Name = arshi1 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 3000, 3000 ifname = A, C rf2 = 3300, 3300 fe = 'shi1', 'shi1' pol = RCP, LCP lo1 = 3900, 3900 note = 'S-hi, no RF filters, native linear, use Zeeman box' / Name = arshi2 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 3200, 3200 ifname = A, C rf2 = 3500, 3500 fe = 'shi2', 'shi2' pol = RCP, LCP lo1 = 4100, 4100 note = 'S-hi, no RF filters, native linear, use Zeeman box' / Name = arshi3 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 3400, 3400 ifname = A, C rf2 = 3700, 3700 fe = 'shi3', 'shi3' pol = RCP, LCP lo1 = 4300, 4300 note = 'S-hi, no RF filters, native linear, use Zeeman box' / Name = arshi4 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 3600, 3600 ifname = A, C rf2 = 3900, 3900 fe = 'shi1', 'shi1' pol = RCP, LCP lo1 = 4500, 4500 note = 'S-hi, no RF filters, native linear, use Zeeman box' / Name = arshi5 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 3800, 3800 ifname = A, C rf2 = 4100, 4100 fe = 'shi5', 'shi5' pol = RCP, LCP lo1 = 4700, 4700 note = 'S-hi, no RF filters, native linear, use Zeeman box' / !-----C-band (3.85 - 6 GHz) Rx, native linear, use the Zbox ---- / Name = arcb0 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 4050, 4050 ifname = A, C rf2 = 4350, 4350 fe = '6cm0', '6cm0' pol = RCP, LCP lo1 = 4950.0, 4950.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb1 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 4250, 4250 ifname = A, C rf2 = 4550, 4550 fe = '6cm1', '6cm1' pol = RCP, LCP lo1 = 5150.0, 5150.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb2 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 4450, 4450 ifname = A, C rf2 = 4750, 4750 fe = '6cm2', '6cm2' pol = RCP, LCP lo1 = 5350.0, 5350.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb3 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 4650, 4650 ifname = A, C rf2 = 4950, 4950 fe = '6cm3', '6cm3' pol = RCP, LCP lo1 = 5550.0, 5550.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb4 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 4850, 4850 ifname = A, C rf2 = 5150, 5150 fe = '6cm4', '6cm4' pol = RCP, LCP lo1 = 5750.0, 5750.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb5 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5050, 5050 ifname = A, C rf2 = 5350, 5350 fe = '6cm5', '6cm5' pol = RCP, LCP lo1 = 5950.0, 5950.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb6 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5250, 5250 ifname = A, C rf2 = 5550, 5550 fe = '6cm6', '6cm6' pol = RCP, LCP lo1 = 6150.0, 6150.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb7 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5450, 5450 ifname = A, C rf2 = 5750, 5750 fe = '6cm7', '6cm7' pol = RCP, LCP lo1 = 6350.0, 6350.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb8 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5650, 5650 ifname = A, C rf2 = 5950, 5950 fe = '6cm8', '6cm8' pol = RCP, LCP lo1 = 6550.0, 6550.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcb9 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5850, 5850 ifname = A, C rf2 = 6150, 6150 fe = '6cm9', '6cm9' pol = RCP, LCP lo1 = 6750.0, 6750.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / !----- CBHigh (6-8 GHz) Rx, native linear, use the Z Box --- / Name = arcbh0 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 5900, 5900 ifname = A, C rf2 = 6200, 6200 fe = 'cbh0', 'cbh0' pol = RCP, LCP lo1 = 6800.0, 6800.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh1 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 6100, 6100 ifname = A, C rf2 = 6400, 6400 fe = 'cbh1', 'cbh1' pol = RCP, LCP lo1 = 7000.0, 7000.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh2 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 6300, 6300 ifname = A, C rf2 = 6600, 6600 fe = 'cbh2', 'cbh2' pol = RCP, LCP lo1 = 7200.0, 7200.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh3 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 6500, 6500 ifname = A, C rf2 = 6800, 6800 fe = 'cbh3', 'cbh3' pol = RCP, LCP lo1 = 7400.0, 7400.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh4 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 6700, 6700 ifname = A, C rf2 = 7000, 7000 fe = 'cbh4', 'cbh4' pol = RCP, LCP lo1 = 7600.0, 7600.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh5 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 6900, 6900 ifname = A, C rf2 = 7200, 7200 fe = 'cbh5', 'cbh5' pol = RCP, LCP lo1 = 7800.0, 7800.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh6 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 7100, 7100 ifname = A, C rf2 = 7400, 7400 fe = 'cbh6', 'cbh6' pol = RCP, LCP lo1 = 8000.0, 8000.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh7 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 7300, 7300 ifname = A, C rf2 = 7600, 7600 fe = 'cbh7', 'cbh7' pol = RCP, LCP lo1 = 8200.0, 8200.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh8 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 7500, 7500 ifname = A, C rf2 = 7800, 7800 fe = 'cbh8', 'cbh8' pol = RCP, LCP lo1 = 8400.0, 8400.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / Name = arcbh9 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 7700, 7700 ifname = A, C rf2 = 8000, 8000 fe = 'cbh9', 'cbh9' pol = RCP, LCP lo1 = 8600.0, 8600.0 note = 'Using up-down conversion unit + VLBIinp at 1.5 MHz' / !----- X-band (8-10 GHz) Rx, native linear, use the Z Box --- / Name = arxbh0 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 7850, 7850 ifname = A, C rf2 = 8150, 8150 fe = 'xbh0', 'xbh0' pol = RCP, LCP lo1 = 8750, 8750 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh1 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 8050, 8050 ifname = A, C rf2 = 8350, 8350 fe = 'xbh1', 'xbh1' pol = RCP, LCP lo1 = 8950, 8950 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh2 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 8250, 8250 ifname = A, C rf2 = 8550, 8550 fe = 'xbh2', 'xbh2' pol = RCP, LCP lo1 = 9150, 9150 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh3 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 8450, 8450 ifname = A, C rf2 = 8750, 8750 fe = 'xbh3', 'xbh3' pol = RCP, LCP lo1 = 7850, 7850 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh4 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 8650, 8650 ifname = A, C rf2 = 8950, 8950 fe = 'xbh4', 'xbh4' pol = RCP, LCP lo1 = 8050, 8050 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh5 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 8850, 8850 ifname = A, C rf2 = 9150, 9150 fe = 'xbh5', 'xbh5' pol = RCP, LCP lo1 = 8250, 8250 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh6 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 9050, 9050 ifname = A, C rf2 = 9350, 9350 fe = 'xbh6', 'xbh6' pol = RCP, LCP lo1 = 8450, 8450 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh7 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 9250, 9250 ifname = A, C rf2 = 9550, 9550 fe = 'xbh7', 'xbh7' pol = RCP, LCP lo1 = 8650, 8650 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh8 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 9450, 9450 ifname = A, C rf2 = 9750, 9750 fe = 'xbh8', 'xbh8' pol = RCP, LCP lo1 = 8850, 8850 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbh9 Station = ARECIBO, AREC_S2 priority = 0 rf1 = 9650, 9650 ifname = A, C rf2 = 9950, 9950 fe = 'xbh9', 'xbh9' pol = RCP, LCP lo1 = 9050, 9050 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / Name = arxbha Station = ARECIBO, AREC_S2 priority = 0 rf1 = 9850, 9850 ifname = A, C rf2 = 10150, 10150 fe = 'xbha', 'xbha' pol = RCP, LCP lo1 = 9250, 9250 note = 'No rf filters yet, RFI at ~ 9.3 and 9.7 GHz' / ! ! ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for EVN ! stations. ! These stations are maintained in file freq_EVN.dat which is maintained ! by C. Reynolds (up tp 2007), A.Polatidis (JIVE), and Friso Olnon ! (since sep 2009). ! ===================================================================== ! Any changes directly to freq.dat will be lost at the next update. ! ! 211097: changes requested by Phil Edwards VSOG, upd priorities ! 170997: changed to freq_EVN.dat ! 210897: Changed on_sx to ON60; inserted Cm frequencies ! 130897: inserted various X band setups Wb,Mc,Nt,On ! 310798: L-band filter VLBA_EB ! 231198: 5cm OH+Methanol/6cm OH setups collected by Desmurs (JFD) ! 231198: changes to LO shanghai ! 260199: 21cm and 7mm setups collected by Desmurs (JFD) ! 220699: Update Hart, small change to eb ! 151099: inserted UHF findings from Desmurs ! 270100: fixed an error in K band CM ! 070200: red-shifted OH and HI Eh7/Ek10 (Hagiwara/Kloeckner) (TrEf/EfOn/WbJb) ! 280300: entires for Sh (dual pol) and Ur ! ----------------------------------------------------------------- ! 301100: responsibility for maintenance of freq_EVN.dat passed to Cormac ! Reynolds (CR). ! 301100: update Hh, Mh, Mc, Tr, Cm, Sh ! 300101: update Mc again ! 020201: update 5cm/OH entries from CJP email (Eb, Nt) ! 160501: update ON 6cm freq range from Conway email ! 030701: ON sx setup ! 050701: Ef/Eb x and sx setup ! 090701: Sh sx setup: added second X-band IF ! 021001: Mh and Eb 3mm setup removed - now maintained in freq_mm.dat by J. ! Attridge at Haystack. ! 171001: 5 and 6 cm OH setups added for several stations after email from JFD ! Mh ifnames at 22 GHz also changed. ! 291001: new 21cm setups for CM/JB ! 180102: 5 cm setups for ON ! 100602: Ef S/X setup - IF1 and IF2 swapped. ! 020702: Added dummy dual pol setups at single pol stations. ! 100902: Changed On 21cm LO. ! 210103: Added multiple 21cm LOs for Onsala. ! 250903: Lovell at 6cm ! 070104: Corrected cm18cm ! 040812: Update to Ur 6cm, 30cm ! 040813: sorted all entries on (lowest) lo freq. ! 040826: update Jb,Eb,Tr ! 050927: new shanghai 18cm LO. JB1_VLBA had wrong IF names at 90cm. ! 051115: added back 3mm setups for Mh, On, Ef/Eb and new PdB and PV ! 051122: Shanghai updates (email from An Tao) ! 051123: Urumqi updates (email from Liu Xiang) ! 060126: Onsala dummy dual pol, Nt 5cm, ! 060518: New Shanghai S/X receiver ! 061012: Removed 43GHz entries for Mc (email from A. Orlati) ! 061102: Put back Nt X-band dummy dual-pol ! 061128: Changed Nt X-band dummy dual-pol to have RCP in the correct IF. ! 070221: Added Hh at 1cm. ! 070525: Changed On at 6cm to avoid high patch at 1Gbps ! 070618: mc_s had the wrong 'fe' - fixed ! 070903: fixed LO and rf1, rf2 for mc5cm ! 080901: Added eb_1420_hi setup - used in HSA 21cm example - from D.Graham/C.Walker ! 080908: New Nt 5cm entries from Cassaro's email ! 080920: Dummy dual pol X band entry OK for Nt ! 081120: Extended frequency range and LO for Wb 6cm to suppress 1Gb/s error messages ! 081120: Extended frequency range for Ef 6cm to suppress 1Gb/s error messages ! 081120: Extended frequency range for On 6cm to suppress 1Gb/s error messages ! 081120: Extended frequency range for Jb1 6cm to suppress 1Gb/s error messages ! 081120: Extended frequency range for Jb2 6cm to suppress 1Gb/s error messages ! 081121: Added "high" 1cm entries for JB2, Cm, On, Ys, Hh, Mc ! 081121: Refined YS 1cm entry ! 081121: Refined Ur X band entries - single pol RCP and dummy dual X band ! 081121: Refined Ys X and S/X band entries - S to IFB deVicente email 081015 ! 081212: Added entries for MERLIN outstations (Da, Ta, Kn, De) to the Cm setups ! 090219: Added Yebes 5cm entries. RCW based on AP email of today. ! 090400: Modified Yebes 5cm and added 6cm ! 090511: Added Kunming ! 090706: Added Beijing (Miyun50 to be?) ! 090924: Added Robledo 34m ! 090924: Renamed Beijing to Miyun50 ! 100318: Fix LOs for sx at EB. RCW. ! ! ----------------------------------------------------------------------- ! Effelsberg ! ! From Dave Graham EMAIL of 15 Nov 1996. ! There are some cases of multiple receivers. Think about ! how to deal with them. ! The curious 50cm LO is caused by contorted mixing for VLBA Name = eb_610 Station = EB_VLBA priority = 0 rf1 = 595, 595 ifname = B, D rf2 = 626, 626 fe = '50cm', '50cm' pol = RCP, LCP lo1 = 60, 60 note = 'Prime focus system: not usually available.' / ! Various L-band filters, these setups may change .. ! prime focus receiver, which is a nuisance for VSOP. Name = eb_1325 Station = EB_VLBA priority = 0 rf1 = 1285, 1285 ifname = B, D rf2 = 1365, 1365 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 775, 775 note = '1285 is really edge of filter, Graham 050299' / Name = eb_1420 Station = EB_VLBA priority = 0 rf1 = 1345, 1345 ifname = B, D rf2 = 1435, 1435 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 850, 850 note = 'Prime focus receiver, Filter in 31/07/98 by rwp' / Name = eb_1420_hi Station = EB_VLBA priority = 0 rf1 = 1380, 1380 ifname = B, D rf2 = 1480, 1480 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 880, 880 note = 'Beware strong RFI at 1450-1460 !!!!' / Name = eb_1640 Station = EB_VLBA priority = 0 rf1 = 1590, 1590 ifname = B, D rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1090, 1090 note = 'Prime focus receiver.' / Name = eb_1660 Station = EB_VLBA priority = 0 rf1 = 1610, 1610 ifname = B, D rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1110, 1110 note = 'Prime focus receiver.' / !Name = eb_1525 Station = EB_VLBA priority = 0 ! rf1 = 1490, 1490 ifname = B, D ! rf2 = 1560, 1560 fe = '20cm', '20cm' ! pol = RCP, LCP lo1 = 980, 980 ! note = 'Prime focus receiver, which is a nuisance for VSOP.' ! removed at request of A. Kraus (CR 24Aug04) !/ !Name = eb_1590 Station = EB_VLBA priority = 5 ! rf1 = 1590, 1590 ifname = B, D ! rf2 = 1710, 1710 fe = '20cm', '20cm' ! pol = RCP, LCP lo1 = 1090, 1090 ! note = 'Prime focus receiver,low LO Graham 26/1/00' ! removed at request of A. Kraus (CR 24Aug04) !/ !Name = eb_1610 Station = EB_VLBA priority = 4 ! rf1 = 1610, 1610 ifname = B, D ! rf2 = 1730, 1730 fe = '20cm', '20cm' ! pol = RCP, LCP lo1 = 1110, 1110 ! note = 'Prime focus receiver,standard LO Graham 26/1/00' ! removed at request of A. Kraus (CR 24Aug04) !/ Name = eb_1660 Station = EB_VLBA priority = 0 rf1 = 1590, 1590 ifname = B, D rf2 = 1730, 1730 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1110, 1110 note = 'Prime focus receiver, which is a nuisance for VSOP.' ! e-mail by Graham Jun 13 97 / Name = eb_s Station = EB_VLBA priority = 1 rf1 = 2200, 2200 ifname = B, D rf2 = 2320, 2320 fe = '13cm', '13cm' pol = RCP, RCP lo1 = 1700, 1700 note = '170Jy S-band system for use with SX, RCP only.' / Name = eb_sd Station = EB_VLBA priority = 5 rf1 = 2200, 2200 ifname = B, D rf2 = 2320, 2320 fe = '13cm', '13cm' pol = RCP, LCP lo1 = 1700, 1700 note = 'Dummy dual-pol entry, only RCP available (CR 2Jul02).' / Name = eb_2695 Station = EB_VLBA priority = 0 rf1 = 2645, 2645 ifname = B, D rf2 = 2745, 2745 fe = '13cm', '13cm' pol = RCP, LCP lo1 = 2000, 2000 note = '30Jy S-Band, not for use with X' / Name = eb_6cm Station = EB_VLBA priority = 0 rf1 = 4600, 4600 ifname = A, C rf2 = 5100, 5100 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4100, 4100 note = '6cm secondary focus.' / Name = eb_5cm Station = EB_VLBA priority = 4 rf1 = 6600, 6600 ifname = B, D rf2 = 6800, 6800 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 6100, 6100 note = 'confirmed A. Kraus (CR 05Feb01)' ! Untested CJP 27-10-1999 (added CR 2Feb01) / Name = eb_sx Station = EB_VLBA priority = 2 rf1 = 2200, 2200, 8300, 8300 ifname = B, D, A, C rf2 = 2320, 2320, 8800, 8800 fe = '13cm', '13cm', '4cm', '4cm' pol = RCP, RCP, RCP, LCP lo1 = 1700, 1700, 7800, 7800 note = 'SX using 4cm secondary focus: not easy to get below 8300.' / !CR 5Jul01: removed at request of A. Kraus via email !Name = eb_sx2 Station = EB_VLBA priority = 3 ! rf1 = 2200, 2200, 8600, 8600 ifname = B, D, A, C ! rf2 = 2320, 2320, 9100, 9100 fe = '13cm', '13cm', '4cm', '4cm' ! pol = RCP, RCP, RCP, LCP lo1 = 1700, 1700, 8100, 8100 ! name = 'SX using 4cm secondary focus: not easy to get below 8300.' !/ Name = eb_x Station = EB_VLBA priority = 0 rf1 = 8300, 8300 ifname = A, C rf2 = 8800, 8800 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 7800, 7800 note = '4cm secondary focus: not easy to get below 8300.' / !CR 5Jul01: removed at request of A. Kraus via email !Name = eb_x2 Station = EB_VLBA priority = 1 ! rf1 = 8600, 8600 ifname = A, C ! rf2 = 9100, 9100 fe = '4cm', '4cm' ! pol = RCP, LCP lo1 = 8100, 8100 ! note = '4cm secondary focus: not easy to get below 8300.' !/ Name = eb2cm_p Station = EB_VLBA priority = 0 rf1 = 11700, 11700 ifname = B, D rf2 = 12500, 12500 fe = '2cm', '2cm' pol = LCP, LCP lo1 = 11500, 11500 note = '12GHz prime focus: not usually available:LCP' / Name = eb2cm_a Station = EB_VLBA priority = 1 rf1 = 13700, 13700 ifname = A, C rf2 = 14200, 14200 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 13200, 13200 note = '2cm secondary focus' / Name = eb2cm_b Station = EB_VLBA priority = 1 rf1 = 14200, 14200 ifname = A, C rf2 = 14700, 14700 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 13700, 13700 note = '2cm secondary focus' / Name = eb2cm_c Station = EB_VLBA priority = 0 rf1 = 14700, 14700 ifname = A, C rf2 = 15200, 15200 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 14200, 14200 note = '2cm secondary focus' / Name = eb2cm_d Station = EB_VLBA priority = 0 rf1 = 15100, 15100 ifname = A, C rf2 = 15600, 15600 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 14600, 14600 note = '2cm secondary focus' / ! 1.3cm secondary focus Name = eb1cm_a Station = EB_VLBA priority = 1 rf1 = 21700, 21700 ifname = A, C rf2 = 22200, 22200 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21200, 21200 note = '1.3cm secondary focus' / Name = eb1cm_b Station = EB_VLBA priority = 0 rf1 = 22000, 22000 ifname = A, C rf2 = 22500, 22500 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21500, 21500 note = '1.3cm secondary focus' / Name = eb1cm_c Station = EB_VLBA priority = 1 rf1 = 22500, 22500 ifname = A, C rf2 = 23000, 23000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 22000, 22000 note = '1.3cm secondary focus' / Name = eb1cm_d Station = EB_VLBA priority = 1 rf1 = 23000, 23000 ifname = A, C rf2 = 23500, 23500 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 22500, 22500 note = '1.3cm secondary focus' / Name = eb1cm_e Station = EB_VLBA priority = 1 rf1 = 23500, 23500 ifname = A, C rf2 = 24000, 24000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 23000, 23000 note = '1.3cm secondary focus' / Name = eb1cm_f Station = EB_VLBA priority = 1 rf1 = 24000, 24000 ifname = A, C rf2 = 24400, 24400 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 23500, 23500 note = '1.3cm secondary focus' / Name = eb7mm_a Station = EB_VLBA priority = 1 rf1 = 41900, 41900 ifname = A, C rf2 = 42400, 42400 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 41400, 41400 note = '7mm secondary focus: affected by poor secondary reflector' / Name = eb7mm_b Station = EB_VLBA priority = 1 rf1 = 42400, 42400 ifname = A, C rf2 = 42900, 42900 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 41900, 41900 note = '7mm secondary focus: affected by poor secondary reflector' / Name = eb7mm_sio Station = EB_VLBA priority = 4 rf1 = 42800, 42800 ifname = A, C rf2 = 43300, 43300 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 42300, 42300 note = '7mm secondary focus: special for both SiO lines Graham 050299' ! values from E-mail D.Graham (JFD 18jan99) / Name = eb7mm_c Station = EB_VLBA priority = 0 rf1 = 42900, 42900 ifname = A, C rf2 = 43400, 43400 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 42400, 42400 note = '7mm secondary focus: affected by poor secondary reflector' / Name = eb7mm_p Station = EB_VLBA priority = 0 rf1 = 43060, 43060 ifname = B, D rf2 = 43200, 43200 fe = '7mm', '7mm' pol = LCP, LCP lo1 = 42560, 42560 note = '7mm prime focus LCP: seldom available, but 2* better than Secondary' / Name = eb7mm_d Station = EB_VLBA priority = 0 rf1 = 43400, 43400 ifname = A, C rf2 = 43900, 43900 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 42900, 42900 note = '7mm secondary focus: affected by poor secondary reflector' / Name = eb7mm_e Station = EB_VLBA priority = 0 rf1 = 43900, 43900 ifname = A, C rf2 = 44400, 44400 fe = '7mm', '7mm' pol = RCP, LCP lo1 = 43400, 43400 note = '7mm secondary focus: affected by poor secondary reflector' / Name = 3mm_eb_vlba Station = EB_VLBA Priority = 0 rf1 = 86000, 86000 ifname = A, C rf2 = 86500, 86500 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 85500, 85500 note = 'new 3mm RX: April 2001 for CMVA' / Name = ef30cm.EV8B Station = EFLSBERG priority = 4 rf1 = 785.5 , 785.5 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 793.5 , 793.5 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 640.5 , 640.5 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 791.5 MHz ! BBC range 145-155MHz / Name = ef30cm.EM34 Station = EFLSBERG priority = 4 rf1 = 846.8 , 846.8 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 854.8 , 854.8 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 699.8 , 699.8 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 848.8 MHz ! BBC range 145-155MHz / Name = ef30cm.EP30 Station = EFLSBERG priority = 4 rf1 = 848.49, 848.49 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 856.49, 856.49 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 701.49, 701.49 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 850.49 MHz ! BBC range 145-155MHz / Name = ef30cm.E4C Station = EFLSBERG priority = 4 rf1 = 874.7 , 874.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 882.7 , 882.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 727.7 , 727.7 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 876.7 MHz ! BBC range 145-155MHz / Name = ef30cm.EV8A Station = EFLSBERG priority = 4 rf1 = 882.6 , 882.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 890.6 , 890.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 737.6 , 737.6 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 888.6 MHz ! BBC range 145-155MHz / Name = ef30cm.EB15B Station = EFLSBERG priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 990.7 , 990.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 838.7 , 838.7 note = 'RCV shifted LO1 (thus BBsyn) because only 4 MHz needed' ! Obs freq 988.7 MHz ! BBC range 145-155MHz / Name = ef30cm.EB15A Station = EFLSBERG priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 994.7 , 994.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 =839.7 , 839.7 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 988.7 MHz ! BBC range 145-155MHz / Name = ef30cm.EO4B Station = EFLSBERG priority = 4 rf1 = 1033.2 , 1033.2 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1041.2 , 1041.2 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 886.2 , 886.2 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 1035.2 MHz ! BBC range 145-155MHz / Name = ef30cm.EO4A Station = EFLSBERG priority = 4 rf1 = 1046.6 , 1046.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1054.6 , 1054.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 899.6 , 899.6 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 1048.6 MHz ! BBC range 145-155MHz / Name = ef30cm.EP31A Station = EFLSBERG priority = 4 rf1 = 1068.75 , 1068.75 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1076.75 , 1076.75 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 923.75 , 923.75 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 1074.75 MHz ! BBC range 145-155MHz / Name = ef30cm.VAH1 Station = EFLSBERG priority = 4 rf1 = 1123.2 , 1123.2 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1131.2 , 1131.2 fe = '30cm' , '30cm' pol = RCP , LCP lo1 =976.2 , 976.2 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 1125.2 MHz ! BBC range 145-155MHz / Name = ef30cm.EP31B Station = EFLSBERG priority = 4 rf1 = 1163.25 , 1163.25 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1171.25 , 1171.25 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 1016.25 , 1016.25 note = 'email from D.Graham (JFD 23-08-99) to cover 147-155 MHz in IF' ! Obs freq 1165.25 MHz ! BBC range 145-155MHz / Name = ef18cm Station = EFLSBERG priority = 4 rf1 = 1610, 1610 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1510.0, 1510.0 note = 'Prime focus receiver, standard LO Graham 26/1/00' / Name = efsx Station = EFLSBERG priority = 5 rf1 = 8360, 2200 ifname = '1N', '2N' fe = '13cm', '4cm' rf2 = 8460, 2300 altifn = '2A', '1A' pol = RCP, RCP lo1 = 8260.0, 2100.0 note = 'Guessing from Pc-sched' ! ranges guessed assuming 100 - 200 BBC range in low output ! updated ifname and altifn after email from A. Kraus (CR 5Jun01) ! Swapped lo1 values March 18, 2010 RCW. / Name = efgeosx Station = EFLSBERG priority = 5 rf1 = 8210, 2200 ifname = '1N', '2N' fe = '13cm', '4cm' rf2 = 8600, 2300 altifn = '2A', '1A' pol = RCP, RCP lo1 = 8110.0, 2100.0 note = 'special setup for Geodesy, contact friend of VLBI' ! ranges guessed assuming 100 - 500 BBC ! Added after email from A. Kraus (CR 5Jun01) ! Swapped lo1 values March 18, 2010 RCW. / Name = ef6cmOH Station = EFLSBERG priority = 5 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 4900, 4900 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4620, 4620 note = 'Values confirmed by E-mail A.Kraus (CR 2Oct01)' / Name = ef6cm Station = EFLSBERG priority = 4 rf1 = 4920, 4920 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4840.0, 4840.0 note = 'LO from e-mail Graham 05NOV96, must be using Low patch' ! ranges refined for 1Gb/s Low patch AGP 201108 / Name = ef5cmOH Station = EFLSBERG priority = 5 rf1 = 5800, 5800 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6100, 6100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5882.0, 5882.0 note = 'Values confirmed by E-mail R.Schulze (JFD 29Sep98)' ! BBC ranges 100 - 200 / Name = ef5cm Station = EFLSBERG priority = 5 rf1 = 6600, 6600 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6800, 6800 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6500.0, 6500.0 note = 'Values confirmed by E-mail R.Schulze (JFD 26Oct98)' / Name = ef_x Station = EFLSBERG priority = 4 rf1 = 8360, 8360 ifname = '1N', '2N' fe = '4cm', '4cm' rf2 = 8460, 8460 altifn = '2A', '1A' pol = RCP, LCP lo1 = 8260.0, 8260.0 ! ranges guessed assuming 100 - 200 BBC range in low output ! updated ifname and altifn after email from A. Kraus (CR 5Jun01) / Name = ef1cm Station = EFLSBERG priority = 4 rf1 = 22180,22180 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22280,22280 altifn = '1A', '2A' pol = RCP, LCP lo1 = 22080.0,22080.0 note = 'LO from Graham 03Jan97; must be using Low patch' ! ranges guessed assuming 100 - 200 BBC range in low output / Name = ef1cmhigh Station = EFLSBERG priority = 4 rf1 = 23500,23500 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 23900,23900 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23400.0,23400.0 note = 'for high K-band test, ranges guessed' ! ranges would allow low or high patching / Name = 3mm_eflsbg Station = EFLSBERG Priority = 0 rf1 = 86100, 86100 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86400, 86400 fe = '3mm', '3mm' pol = LCP, RCP lo1 = 85900, 85900 note = 'new 3mm RX: April 2001 for CMVA' / Name = 3mm_eflsbg-l Station = EFLSBERG Priority = 0 !this is for high patching (200->500 MHz) rf1 = 86100, 86100 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86400, 86400 fe = '3mm', '3mm' pol = LCP, LCP lo1 = 85900, 85900 note = 'new 3mm RX: April 2001 for CMVA' / ! ! EVN data by Huib Jan van Langevelde ! LO's from various e-mails, ifnames based on recorder ! rf1 and rf2 are usually simple guesses from BBC range. ! ! First EVN stations with VLBA -type recorders ! ! ! Add entries for all MERLIN outstations similar to Cambridge 32M ! since they share the VLBA DAR Name = cm21cm Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 1400, 1400 ifname = C, A rf2 = 1430, 1430 fe = '21cm', '21cm' pol = RCP, LCP lo1 = 830.0, 830.0 note = 'From Burgess via email (CR 29Oct01)' / Name = cm18cm Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 1610, 1610 ifname = C, A rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1110.0, 1110.0 note = 'Confirmed by Alastair Gunn 31 Jan 2005' / Name = cm6cmOH Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 5 rf1 = 4640, 4640 ifname = C, A rf2 = 5100, 5100 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4140.0, 4140.0 note = 'MK2 LO setting-400MHz, P. Burgess (JFD 05Oct01)' ! update from JFD (CR 17Oct01) / Name = cm6cm Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 4940, 4940 ifname = C, A rf2 = 5400, 5400 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4440.0, 4440.0 note = 'Confirmed by Alastair Gunn 210897' / Name = cm5cmOH Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 6000, 6000 ifname = C, A rf2 = 6100, 6100 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 5512, 5512 note = 'MK2 LO setting-400MHz, P. Burgess (JFD 15Oct01)' ! ranges guessed assuming 100 - 200 BBC range ! update from JFD (CR 17Oct01) / Name = cm5cm Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 6600, 6600 ifname = C, A rf2 = 6700, 6700 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 6120, 6120 note = 'MK2 LO setting-400MHz, P. Burgess (JFD 15Oct01)' ! update from Burgess (CR 24Oct01) / Name = cm1cm Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 22200,22200 ifname = C, A rf2 = 22600,22600 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21680.0, 21680.0 note = 'Confirmed by Alastair Gunn 210897 CHECK' / Name = cm1cmhigh Station = CAMBG32M, DARNHALL, KNOCKIN, TABLEY, DEFFORD priority = 4 rf1 = 23500,23500 ifname = C, A rf2 = 23900,23900 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 23000.0, 23000.0 note = 'for high K-band test, ranges guessed' / Name = mh18cm Station = METSAHOV priority = 5 note = 'No 18cm at MH' / Name = mh6cm Station = METSAHOV priority = 5 note = 'No 6cm at MH' / Name = mh_sx Station = METSAHOV priority = 5 rf1 = 2210, 8150 ifname = C, A rf2 = 2350, 8630 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 1530, 7650 note = 'From Mujunen 25/11/2005' / Name = mh1cm Station = METSAHOV priority = 4 rf1 = 21980, 21980 ifname = C, A rf2 = 22480, 22480 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21480.0, 21480.0 note = 'LO based on Wiik 03JUN96' ! RCP & LCP, BBC range ~500-1000MHz (CR: from Kononen 1Dec00) ! CR: ifname C, A instead of B, A (from Huib 17Oct01, confirmed Kononen) / Name = mh7mm_sio Station = METSAHOV priority = 4 rf1 = 42980, 42980 ifname = C, A rf2 = 43480, 43480 fe = '7mm', '7mm' pol = LCP, LCP lo1 = 42480.0, 42480.0 note = ' ** LCP only **, Values from E-mail K.Karlamaa (JFD 19jan99) ' ! only single Pol LCP, BBC range ~500-1000MHz ! ifname updated from Kononen (CR 2Dec00) / ! METSAHOV at 3 mm for 256-16-1 dual pol ! Name = 3mm_metsa Station = METSAHOV Priority = 0 rf1 = 85872, 85872 ifname = A, C rf2 = 86372, 86372 fe = '3mm', '3mm' ! pol = LCP, RCP lo1 = 85372, 85372 pol = LCP, RCP lo1 = 85501, 85501 / Name = nt90cm Station = NOTO, NOTO_S2 priority = 3 rf1 = 250, 250 ifname = C, A rf2 = 600, 600 fe = '90cm', '90cm' pol = RCP, LCP lo1 = 1150.1, 1150.1 note = '' ! awaiting confirmation from Cassaro (CR 21 Sep 2004) / Name = nt50cm Station = NOTO, NOTO_S2 priority = 3 rf1 = 600, 600 ifname = C, A rf2 = 950, 950 fe = '50cm', '50cm' pol = RCP, LCP lo1 = 0, 0 note = '' ! from Cassaro email 040820 (CR 21 Sep 2004) / Name = nt18cm Station = NOTO, NOTO_S2 priority = 3 rf1 = 1622, 1622 ifname = C, A rf2 = 1702, 1702 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 799.1, 799.1 note = 'LO from Trigilio 26Sep96' ! email update Cassaro April 2003 (CR 1May03) / Name = nt18+21cm Station = NOTO, NOTO_S2 priority = 4 rf1 = 1400, 1400 ifname = C, A rf2 = 1702, 1702 fe = '18+21cm', '18+21cm' pol = RCP, LCP lo1 = 799.1, 799.1 note = 'LO from Trigilio 26Sep96' ! email update Cassaro April 2003 (CR 1May03) / Name = ntsx Station = NOTO priority = 5 rf1 = 2040, 2040, 8100, 8100 ifname = C, D, A, B rf2 = 2540, 2540, 8600, 8600 fe = '13cm', '13cm', '4cm', '4cm' pol = RCP, RCP, RCP, RCP lo1 = 1540.1, 1540.1, 7600.1, 7600.1 note = 'From e-mail Corrado Trigilio 29/07/97, only RCP' ! ranges from assuming BBC can do 500 - 1000 MHz / Name = nt6cm Station = NOTO, NOTO_S2 priority = 3 rf1 = 4700, 4700 ifname = C, A rf2 = 5100, 5100 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4120.1, 4120.1 note = 'LO from Gino Tuccari 04JUN96; channels from Trigilio 27SEP96' ! ranges guessed assuming a 500 - 1000 MHz BBC / !Name = nt5cmOH Station = NOTO, NOTO_S2 priority = 5 ! rf1 = 6000, 6000 ifname = C, A ! rf2 = 6100, 6100 fe = '5cm', '5cm' ! pol = RCP, LCP lo1 = 5280.1, 5280.1 ! note = 'Setup not yet confirmed - may not work at all (CR 25Jan06)' ! ! added after email from C.Phillips (CR 2Feb01) ! ! removed after email from Cassaro - frequencies not available (CR 1May03) ! AGP: removed again after email from Cassaro 08Sep2008 !/ !Name = nt5cm Station = NOTO, NOTO_S2 priority = 5 ! rf1 = 6600, 6600 ifname = C, A ! rf2 = 6800, 6800 fe = '5cm', '5cm' ! pol = RCP, LCP lo1 = 7435.9, 7435.9 ! note = 'LSB receiver - LO by C. Trigilio Mar03' ! ! email update from Cassaro (CR 1May03) ! AGP: Removed and commented out after email from Cassaro 08Sep2008 ! Replaced by nt5cmA below !/ ! ! AGP: All Nt 5cm setups from email by Cassaro 08Sep2008 Name = nt5cmA Station = NOTO priority = 5 rf1 = 6500, 6500 ifname = C, A rf2 = 6800, 6800 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 7435.9, 7435.9 note = 'LSB receiver - LO by P.Cassaro sep08' / Name = nt5cmB Station = NOTO priority = 5 rf1 = 6200, 6200 ifname = C, A rf2 = 6500, 6500 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 7135.9, 7135.9 note = 'LSB receiver - LO by P.Cassaro sep08' / Name = nt5cmC Station = NOTO priority = 5 rf1 = 5900, 5900 ifname = C, A rf2 = 6200, 6200 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 6835.9, 6835.9 note = 'LSB receiver - LO by P.Cassaro sep08' / Name = nt5cmD Station = NOTO priority = 5 rf1 = 5600, 5600 ifname = C, A rf2 = 5900, 5900 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 6535.9, 6535.9 note = 'LSB receiver - LO by P.Cassaro sep08' / Name = nt5cmE Station = NOTO priority = 5 rf1 = 5300, 5300 ifname = C, A rf2 = 5600, 5600 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 6235.9, 6235.9 note = 'LSB receiver - LO by P.Cassaro sep08 / !Name = nt_x Station = NOTO priority = 4 ! rf1 = 8100, 8100 ifname = C, A ! rf2 = 8600, 8600 fe = '4cm', '4cm' ! pol = RCP, RCP lo1 = 7600.1, 7600.1 ! note = 'Based on e-mail Corrado Trigilio 29/07/97' ! ! ranges from assuming BBC can do 500 - 1000 MHz ! ! removed after email from Cassaro (CR 1May03) !/ Name = nt_xd Station = NOTO priority = 6 rf1 = 8100, 8100 ifname = A, C rf2 = 8600, 8600 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 7600.1, 7600.1 note = 'Dummy dual-pol entry, only RCP available (CR 28Nov06).' ! Worked Oct 2008 N08X1 and GW019B (AGP 20Oct08) ! ranges from assuming BBC can do 500 - 1000 MHz / Name = nt1cm Station = NOTO priority = 4 rf1 = 21950, 21950 ifname = C, A rf2 = 22325, 22325 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21389.1, 21389.1 note = 'LO from Gino Tuccari 04JUN96; channels from Tuccari Mar03' ! ranges guessed assuming a 500 - 1000 MHz BBC ! email update Cassaro April 2003 (CR 1May03) ! removed NOTO_S2 email from Cassaro 08Sep2008 / Name = nt7mm_sio Station = NOTO priority = 4 rf1 = 42500 ifname = 'C' fe = '7mm' rf2 = 43250 pol = LCP lo1 = 42270.0 note = ' ** LCP only **, (JFD 05jan99); LO from Trigilio Mar03' ! only single Pol LCP, the receiver is shared with Medicina ! email update Cassaro April 2003 (CR 1May03) / ! removed at request of H. Xinyong (CR 3Sep03) !Name = sh18cmo Station = SHANGHAI, SHANG_S2 priority = 5 ! rf1 = 1320, 1320 ifname = A ! rf2 = 1820, 1820 fe = '18cm', '18cm' ! pol = LCP, LCP lo1 = 820.10, 820.10 ! note = 'Huang Xinyong 231198, old (obsolete?) configuration' ! ! ranges from assuming BBC can do 500 - 1000 MHz !/ Name = sh18cm Station = SHANGHAI, SHANG_S2 priority = 4 rf1 = 1600, 1600 ifname = C, A rf2 = 1740, 1740 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 2300.00, 2300.00 note = 'Huang Xinyong 27Sept05' / Name = sh6cm Station = SHANGHAI, SHANG_S2 priority = 5 rf1 = 4650, 4650 ifname = C, A rf2 = 5150, 5150 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4200.0, 4200.0 note = 'Update freq. range AnTao 22Mar08' / Name = shsx Station = SHANGHAI, SHANG_S2 priority = 5 rf1 = 2150, 8200 ifname = C, A rf2 = 2450, 8600 pol = RCP, RCP lo1 = 1600, 9100 note = 'From An Tao 18May2006' / Name = shsx2 Station = SHANGHAI, SHANG_S2 priority = 6 rf1 = 2150, 8600 ifname = C, A rf2 = 2450, 9000 pol = RCP, RCP lo1 = 1600, 8100 note = 'From An Tao 18May2006' / Name = shx Station = SHANGHAI, SHANG_S2 priority = 5 rf1 = 8200, 8200 ifname = C, A rf2 = 8600, 8600 pol = RCP, RCP lo1 = 9100, 9100 note = 'From An Tao 18May2006. Normal X-band' / Name = shxd Station = SHANGHAI, SHANG_S2 priority = 5 rf1 = 8200, 8200 ifname = A, C rf2 = 8600, 8600 pol = RCP, LCP lo1 = 9100, 9100 note = 'From An Tao 18May2006. Dummy dual pol - only RCP available' ! AGP 06Nov2008 Changed the IF allocation RCP on A as usual S/X / Name = shxd2 Station = SHANGHAI, SHANG_S2 priority = 6 rf1 = 8600, 8600 ifname = A, C rf2 = 9000, 9000 pol = RCP, LCP lo1 = 8100, 8100 note = 'From An Tao 18May2006. Dummy dual pol - only RCP available' ! AGP 06Nov2008 Changed the IF allocation RCP on A as usual S/X / ! AGP 07Nov2008 Commented out entry below - seems copy of shx above ! but wrong !Name = shx Station = SHANGHAI, SHANG_S2 priority = 6 ! rf1 = 8200, 8600 ifname = C, A ! rf2 = 2450, 9000 ! pol = RCP, RCP lo1 = 1600, 8000 ! note = 'From An Tao 18May2006 ' !/ Name = sh1cm Station = SHANGHAI, SHANG_S2 priority = 5 rf1 = 22100, 22100 ifname = C, A rf2 = 22600, 22600 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21600.0, 21600.0 note = 'From Porcas, from Huang Xinyong 231198' ! ranges guessed assuming a 500 - 1000 MHz BBC / Name = tr30cm.mid Station = TORUN priority = 4 rf1 = 867.5,867.5 ifname = C, A rf2 = 882.5, 882.5 fe = '30cm', '30cm' pol = RCP , LCP lo1 = 1700, 1700 note = '** Dummy setup **; RCV asks if better to avoid low LO1=200 for RFI' ! JFD : After my phone call with A. Kus Thuesday 25 August ! ranges 500 - 1000 BBC range / Name = tr30cm.low Station = TORUN priority = 4 rf1 = 700 , 700 ifname = C, A rf2 = 867.5, 867.5 fe = '30cm', '30cm' pol = RCP , LCP lo1 = 1750, 1750 note = '** Dummy setup **; RCV asks if better to avoid low LO1=200 for RFI' ! JFD : After my phone call with A. Kus Thuesday 25 August ! ranges 500 - 1000 BBC range / Name = tr30cm.high Station = TORUN priority = 4 rf1 = 882.5,882.5 ifname = C, A rf2 = 1105 , 1105 fe = '30cm', '30cm' pol = RCP , LCP lo1 = 1750, 1750 note = '** Dummy setup **; RCV asks if better to avoid low LO1=200 for RFI' ! JFD : After my phone call with A. Kus Thuesday 25 August ! ranges 500 - 1000 BBC range / Name = tr18cm Station = TORUN priority = 3 rf1 = 1350, 1350 ifname = C, A rf2 = 1750, 1750 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 2300, 2300 note = 'E-mail Borkowski 12Mar98, preferred alternative' !changed to 1350 for EH7 Borowski 31/1/00 !CR: changed rf2 from K.Borkowski 12Jan01 / !Name = tr18bcm Station = TORUN priority = 5 ! rf1 = 1500, 1500 ifname = C, A ! rf2 = 1800, 1800 fe = '18cm', '18cm' ! pol = RCP, LCP lo1 = 1000, 1000 ! note = 'E-mail Borkowski 12Mar98, not preferred interference' ! CR: removed 12Jan01 after request by K.Borkowski !/ Name = tr6cmOH Station = TORUN priority = 5 rf1 = 4350, 4350 ifname = C, A rf2 = 4950, 4950 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 3900.0, 3900.0 note = 'E-mail K.Borkowski 23Apr03, alternative (CR 1May03)' / Name = tr6cm Station = TORUN priority = 3 rf1 = 4750, 4750 ifname = C, A rf2 = 5350, 5350 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4200.0, 4200.0 note = 'E-mail Borkowski 23Apr03 (CR 1May03)' / Name = tr5cmOH Station = TORUN priority = 5 rf1 = 5900, 5900 ifname = C, A rf2 = 6400, 6400 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 5400.0, 5400.0 note = 'Values confirmed by E-mail K.Borkowski (JFD 02Oct98)' / Name = tr5cm Station = TORUN priority = 4 rf1 = 6400, 6400 ifname = C, A rf2 = 6900, 6900 fe = '5cm', '5cm' pol = RCP, LCP lo1 = 5900.0, 5900.0 note = 'Values confirmed by E-mail Borkowski (JFD 26Oct98)' / Name = ur90cm Station = URUMQI rf1 = 314, 314 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 337, 337 fe = '90cm', '90cm' pol = RCP, LCP lo1 = 0, 0 note = 'Single polarization only available - may be either RCP or LCP' !CR: From L.Xiang 21 Sep 2004' / Name = ur30cm Station = URUMQI rf1 = 790, 790 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1120, 1120 fe = '30cm', '30cm' pol = RCP, LCP lo1 = 700, 700 note = 'Severe RFI: 928-963 MHz (GSM), 872-882 MHz (CDMA)' !CR: From L.Xiang 8 Aug 2004' / Name = ur18cm Station = URUMQI rf1 = 1410, 1410 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1735, 1735 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1300, 1300 note = 'update L.Xiang 9Feb05' / Name = ursx Station = URUMQI rf1 = 2150, 8200 ifname = '2N', '1N' fe = '13cm', '4cm' rf2 = 2450, 8600 altifn = '1A', '2A' pol = RCP, RCP lo1 = 2020, 8100 note = 'From X.Hong 280300' / ! obsolete since new Urumqi receiver installed !Name = ur6cm Station = URUMQI priority = 1 ! rf1 = 4750 ifname = '1N' fe = '6cm' ! rf2 = 5150 altifn = '2A' ! pol = LCP lo1 = 4620.0 ! note = 'From L.Xiang 280300' ! !CR: update from Lorant (1Dec00) !/ Name = ur6cm Station = URUMQI priority = 1 rf1 = 4720, 4720 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5220, 5220 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4620.0, 4620.0 note = '' !CR: update From L.Xiang 8Aug04' / Name = urx Station = URUMQI priority = 6 rf1 = 8300, 8300 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8580, 8580 altifn = '1A', '2A' pol = RCP, RCP lo1 = 8100, 8100 note = 'single pol entry, only RCP available' ! ranges guessed assuming BBC 220 - 500; copied from onxd / Name = urxd Station = URUMQI priority = 6 rf1 = 8300, 8300 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8580, 8580 altifn = '1A', '2A' pol = LCP, RCP lo1 = 8100, 8100 note = 'dummy dual-pol entry, only RCP available' ! ranges guessed assuming BBC 220 - 500; copied from onxd / Name = ur1cm Station = URUMQI priority = 1 rf1 = 22100, 22100 ifname = '1N' altifn = '2A' rf2 = 24000, 24000 fe = '1cm', '1cm' pol = LCP, LCP lo1 = 22000.0, 22000.0 note = 'From X.Hong 280300' / Name = ur1cmd Station = URUMQI priority = 5 rf1 = 22100, 22100 ifname = '2N','1N' fe = '1cm', '1cm' rf2 = 24000, 24000 altifn = '1A','2A' pol = RCP, LCP lo1 = 22000.0, 22000.0 note = 'Dummy dual-pol entry, only LCP available (CR 2Jul02).' / Name = j1b90cm Station = JODRELL1 priority = 1 rf1 = 314, 314 ifname = '2N', '1N' fe = '90cm', '90cm' rf2 = 336, 336 altifn = '1A', '2A' pol = RCP, LCP lo1 = 150.0, 150.0 note = 'from Burgess, 8 Aug 2004' / Name = jb30cm.EV008B Station = JODRELL1 priority = 4 rf1 = 785.5 , 785.5 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 793.5 , 793.5 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 640.5 , 640.5 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 791.5 MHz / Name = jb30cm.EM034 Station = JODRELL1 priority = 4 rf1 = 846.8 , 846.8 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 854.8 , 854.8 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 699.8 , 699.8 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 848.8 MHz / Name = jb30cm.EP030 Station = JODRELL1 priority = 4 rf1 = 848.49, 848.49 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 856.49, 856.49 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 701.49, 701.49 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 850.49 MHz / Name = jb30cm.EO004C Station = JODRELL1 priority = 4 rf1 = 874.7 , 874.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 882.7 , 882.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 727.7 , 727.7 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 876.7 MHz / Name = jb30cm.EV008A Station = JODRELL1 priority = 4 rf1 = 882.6 , 882.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 890.6 , 890.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 737.6 , 737.6 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 888.6 MHz / Name = jb30cm.EB015B Station = JODRELL1 priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 990.7 , 990.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 838.7 , 838.7 note = 'RCV shifted LO1 (thus BBsyn) because only 4 MHz needed' ! Obs freq 988.7 MHz / Name = jb30cm.EB015A Station = JODRELL1 priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 994.7 , 994.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 =839.7 , 839.7 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 988.7 MHz / Name = jb30cm.EO004B Station = JODRELL1 priority = 4 rf1 = 1033.2 , 1033.2 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1041.2 , 1041.2 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 886.2 , 886.2 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 1035.2 MHz / Name = jb30cm.EO004A Station = JODRELL1 priority = 4 rf1 = 1046.6 , 1046.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1054.6 , 1054.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 899.6 , 899.6 note = 'email from S.Garrington (JFD 24-08-99) to copy Effelsberg' ! Obs freq 1048.6 MHz / Name = jb30cm.EP031A Station = JODRELL1 priority = 4 rf1 = 1068.75 , 1068.75 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1076.75 , 1076.75 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 923.75 , 923.75 note = 'RCV shifted LO1 (thus BBsyn) because HI line in upper part of 8 MHz' ! Obs freq 1074.75 MHz / Name = j121.1cm Station = JODRELL1 priority = 4 rf1 = 1404, 1404 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1420, 1420 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1200, 1200 note = 'Values from E-mail A.Gunn (JFD 07jan99)' ! VC ranges 204 - 220, No VC freq possible above 220MHz. / Name = j121red Station = JODRELL1 priority = 4 rf1 = 1330, 1330 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1430, 1430 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1230, 1230 note = 'Values from SImon Garrington for red HI 21/01/00' ! VC ranges 100 - 200, assuming that's OK / Name = j1b1550 Station = JODRELL1 priority = 5 rf1 = 1550, 1550 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1650, 1650 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1450.0, 1450.0 note 'Special entry red OH Ek10, Garrington 25/1/00' / Name = j1b18cm Station = JODRELL1 priority = 3 rf1 = 1610, 1610 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1510.0, 1510.0 note = 'LO from Parry 23Jan97, must be using Low patch' ! ranges guessed assuming 100 - 200 BBC range in low output / Name = j1b6cm Station = JODRELL1 priority = 3 rf1 = 4920, 4920 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4840.0, 4840.0 note = 'LO from Spencer 05Jun96, must be using Low patch' ! update from Gunn, 03Sep, use same setup as Mk2 (CR 03Sep25) ! Change ranges for 1Gb/s (AGP 201108) / Name = j1v90cm Station = JB1_VLBA priority = 1 rf1 = 314, 314 ifname = 'A', 'C' fe = '90cm', '90cm' rf2 = 336, 336 pol = RCP, LCP lo1 = 844.0, 844.0 note = 'from Burgess, 8 Aug 2004' / Name = j1v18cm Station = JB1_VLBA priority = 4 rf1 = 1300, 1300 ifname = C, A rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1110.0, 1110.0 note = 'LO from Burgess 29Apr97' ! ranges guessed assuming a 500 - 1000 MHz BBC / Name = j1v6cm Station = JB1_VLBA priority = 4 rf1 = 4940, 4940 ifname = C, A rf2 = 5400, 5400 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4440.0, 4440.0 note = 'LO from Paul Burgess 10Jun96' ! Assume same as Mk2 (CR 2003Sep26) / Name = j2b90cm Station = JODRELL2 priority = 1 rf1 = 314, 314 ifname = '2N', '1N' fe = '90cm', '90cm' rf2 = 336, 336 altifn = '1A', '2A' pol = RCP, LCP lo1 = 150.0, 150.0 note = 'from Burgess, 8 Aug 2004' / Name = j2b21cm Station = JODRELL2 priority = 4 rf1 = 1400, 1400 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1430, 1430 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1230.0, 1230.0 note = 'From Burgess via email (CR 29Oct01)' ! ranges guessed assuming 170 - 200 BBC range in low output / Name = j2b18cm Station = JODRELL2 priority = 4 rf1 = 1610, 1610 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1510.0, 1510.0 note = 'LO from Parry 23Jan97, assuming ident to JB1' ! rf2=1730 from Alastair Gunn, 31Jan2005 / Name = j2c6cmOH Station = JODRELL2 priority = 5 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 4800, 4800 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4600.0, 4600.0 note = 'Values confirmed by E-mail P.Burgess (JFD 29Sep98)' ! always assume the 100 - 200 BBC range at Jodrell / Name = j2b6cm Station = JODRELL2 priority = 3 rf1 = 4920, 4920 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4840.0, 4840.0 note = 'LO from Spencer 05Jun96, must be using Low patch' ! ranges changed for 1Gb/s (AGP 201108) / Name = j2b5cmOH Station = JODRELL2 priority = 5 rf1 = 6000, 6000 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6100, 6100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5912.0, 5912.0 note = 'Guessed values from PC-SCHED (JFD 05Oct98) ' ! ranges guessed assuming 100 - 200 BBC range ! update from JFD (CR 17Oct01) / Name = j2b5cm Station = JODRELL2 priority = 5 rf1 = 6600, 6600 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6700, 6700 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6520.0, 6520.0 note = 'Values confirmed by E-mail P.Burgess (JFD 26Oct98)' / Name = j2b1cm Station = JODRELL2 priority = 4 rf1 = 22180,22180 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22280,22280 altifn = '1A', '2A' pol = RCP, LCP lo1 = 22080.0,22080.0 note = 'Guess from NET1A in PC-SCHED, must be using Low patch' ! ranges guessed assuming 100 - 200 BBC range in low output / Name = j2b1cmhigh Station = JODRELL2 priority = 4 rf1 = 23500,23500 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 23900,23900 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23400.0,23400.0 note = 'for high K-band test, ranges guessed' ! ranges would allow for either low or high patching / Name = j2v90cm Station = JB2_VLBA priority = 1 rf1 = 314, 314 ifname = 'C', 'A' fe = '90cm', '90cm' rf2 = 336, 336 pol = RCP, LCP lo1 = 844.0, 844.0 note = 'from Burgess, 8 Aug 2004' / Name = j2v18cm Station = JB2_VLBA priority = 4 rf1 = 1300, 1300 ifname = C, A rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1110.0, 1110.0 note = 'LO from Burgess 29Apr97' ! ranges guessed assuming a 500 - 1000 MHz BBC / Name = j2v6cm Station = JB2_VLBA priority = 4 rf1 = 4940, 4940 ifname = C, A rf2 = 5400, 5400 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4440.0, 4440.0 note = 'LO from Paul Burgess 10Jun96' ! ranges guessed assuming a 500 - 1000 MHz BBC / Name = j2v1cm Station = JB2_VLBA priority = 4 rf1 = 22200,22200 ifname = C, A rf2 = 22600,22600 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21680.0, 22080.0 note = 'From MkIII and guessing 400 MHz converter, Huib' ! ranges guessed assuming a 500 - 1000 MHz BBC / Name = j2v1cmhigh Station = JB2_VLBA priority = 4 rf1 = 23500,23500 ifname = C, A rf2 = 23900,23900 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 23000.0, 23000.0 note = 'for high K-band test, ranges guessed' ! ranges for 500-900 VLBA-type IF / ! Name = mc21cm Station = MEDICINA priority = 3 rf1 = 1366, 1366 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1446, 1446 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1036.0, 1036.0 note = 'updated from Maccaferri (CR 30Jan01)' ! BBC range 250 - 500 BBC range / Name = mcOHlin Station = MEDICINA priority = 5 rf1 = 1599, 1599 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1679, 1679 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1269.0, 1269.0 note = 'updated from Maccaferri (CR 2Dec00)' / Name = mc18cm Station = MEDICINA priority = 3 rf1 = 1625, 1625 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1705, 1705 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1295.0, 1295.0 note = 'updated from Maccaferri (CR 2Dec00)' / Name = mc_s Station = MEDICINA priority = 4 rf1 = 2200, 2200 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2360, 2360 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2020, 2020 note = 'added from Maccaferri (CR 30Nov00)' / Name = mcsx Station = MEDICINA priority = 5 rf1 = 2200, 8180 ifname = '2N', '1N' fe = '13cm', '4cm' rf2 = 2360, 8580 altifn = '1A', '2A' pol = RCP, RCP lo1 = 2020, 8080 note = 'Updated from Maccaferri (CR 30Jan01) / Name = mc6cm Station = MEDICINA priority = 3 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5100, 5100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4600.0, 4600.0 note = 'Values confirmed by E-mail A.Orfei (JFD 2Oct98)' ! BBC range 100 - 500, Maccaferri 11/2000 (CR) / Name = mc6cmOH Station = MEDICINA priority = 5 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5100, 5100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4600.0, 4600.0 note = 'Values confirmed by E-mail A.Orfei (JFD 2Oct98)' ! BBC ranges 100-500. ! same settings as mc6cm - Maccaferri 30Jan01 (CR) / Name = mc5cmOH Station = MEDICINA priority = 5 rf1 = 5900, 5900 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6300, 6300 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5800.0, 5800.0 note = 'Updated by E-mail Orlati (CR 15Nov2004)' / Name = mc5cm Station = MEDICINA priority = 5 rf1 = 6500, 6500 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6900, 6900 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6400.0, 6400.0 note = 'Updated by e-mail Orlati (13Feb2006)' / Name = mc_x Station = MEDICINA priority = 4 rf1 = 8180, 8180 ifname = '1N', '2N' fe = '4cm', '4cm' rf2 = 8580, 8580 altifn = '2A', '1A' pol = RCP, LCP lo1 = 8080, 8080 note = 'changed Maccaferri (CR 30Jan01)' / Name = mcredH2O Station = MEDICINA priority = 4 rf1 = 21860,21860 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22260,22260 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21760.0,21760.0 note = 'Special entry by Lincoln Greenhill for red H2O' ! Change to reflect alternate permitted tuning of LO chain as ! indicated on astbo1 web site. / Name = mc13mm Station = MEDICINA priority = 4 rf1 = 22064,22064 ifname = '2N', '1N' fe = '13mm', '13mm' rf2 = 22464,22464 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21964.0, 21964.0 note = 'values confirmed Maccaferri (CR 30Nov00)' ! typo on rf2 corrected and Name changed from mc1cm (CR 29Jan01) / !Name = mc7mm_sio Station = MEDICINA priority = 4 ! rf1 = 42850 ifname = '1N' fe = '7mm' ! rf2 = 43250 altifn = '2A' ! pol = LCP lo1 = 42750.0 ! note = ' ** LCP only **, values from E-mail A.Orfei (JFD 18jan99) ' ! ! only single Pol LCP, the receiver is shared with Noto !/ !Name = mc7mm_d Station = MEDICINA priority = 5 ! rf1 = 42850, 42850 ifname = '2N', '1N' fe = '7mm' ! rf2 = 43250, 43250 altifn = '1A', '2A' ! pol = RCP, LCP lo1 = 42750.0, 42750.0 ! note = 'Dummy dual-pol entry, only LCP available (CR 2Jul02).' !/ Name = ons18cm Station = ONSALA60 priority = 5 note = 'No 18cm on smaller On dish' / Name = ons6cm Station = ONSALA60 priority = 5 note = 'No 6cm on smaller On dish??' / Name = onsx Station = ONSALA60 priority = 5 rf1 = 2240, 8300 ifname = '2N', '1N' fe = '13cm', '4cm' rf2 = 2520, 8580 altifn = '1A', '2A' pol = RCP, RCP lo1 = 2020, 8080 note = 'Antonis Polatidis 210897' ! ranges guessed assuming BBC 220 - 500 / Name = onxd Station = ONSALA60 priority = 6 rf1 = 8300, 8300 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8580, 8580 altifn = '1A', '2A' pol = LCP, RCP lo1 = 8080, 8080 note = 'On is dual pol X band since 2007' ! ranges guessed assuming BBC 220 - 500 / Name = ons1cm Station = ONSALA60 priority = 4 rf1 = 22120,22120 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22400,22400 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21900.0,21900.0 note = 'Conway in my office 28Jan97, must be High patch' ! ranges guessed assuming BBC 220 - 500 corrected 000217 LJG/HJvL / Name = ons1cmhigh Station = ONSALA60 priority = 4 rf1 = 23500,23500 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 23900,23900 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23400.0,23400.0 note = 'for high K-band test, ranges guessed' / !Name = ons_x Station = ONSALA60 priority = 3 ! rf1 = 8300, 8300 ifname = '2N', '1N' fe = '4cm', '4cm' ! rf2 = 8580, 8580 altifn = '1A', '2A' ! pol = RCP, RCP lo1 = 8080.0, 8080.0 ! note = 'From Polatidis, 13/8/97 RCP only' ! ! ranges guessed assuming BBC 220 - 500 ! Removed at request of Polatidis (CR 3Jul01) !/ Name = on7mm_sio Station = ONSALA60 priority = 4 rf1 = 42800 ifname = '1N' fe = '7mm' rf2 = 43200 altifn = '2A' pol = LCP lo1 = 42700.0 note = ' ** LCP only **, values from E-mail J.Conway (JFD 12jan99) ' ! only single Pol LCP, BBC range ~100-500MHz / Name = on7mm_sio2 Station = ONSALA60 priority = 5 rf1 = 42900 ifname = '1N' fe = '7mm' rf2 = 43300 altifn = '2A' pol = LCP lo1 = 42800.00 note = ' ** LCP only **, values from E-mail J.Conway (JFD 12jan99) ' ! only single Pol LCP, BBC range ~100-500MHz / ! ! ONSALA at 3 mm Name = 3mm_onsala Station = ONSALA60 Priority = 0 rf1 = 86150, 86150 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86440, 86440 fe = '3mm', '3mm' pol = LCP, RCP lo1 = 85900, 85900 / ! ONSALA at 3 mm 256-16-1 no pol ! added for Oct 2000, CMVA session, since other setup produces errors, TPK Name = 3mm_onsa-lcp STATION = ONSALA60 Priority = 0 rf1 = 86150, 86150 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86440, 86440 fe = '3mm', '3mm' pol = LCP, LCP lo1 = 85900, 85900 / Name = on30cm.low Station = ONSALA85 priority = 4 rf1 = 780 , 780 ifname = '2N' , '1N' fe = '30cm' , '30cm' rf2 = 900 , 900 altifn = '1A' , '2A' pol = RCP, LCP lo1 = 650 , 650 note = 'Confirmed by email J.Conway (JFD 25-08-99)' / Name = on30cm.mid Station = ONSALA85 priority = 4 rf1 = 800 , 800 ifname = '2N' , '1N' fe = '30cm' , '30cm' rf2 = 920 , 920 altifn = '1A' , '2A' pol = RCP, LCP lo1 = 700 , 700 note = 'Confirmed by email J.Conway (JFD 25-08-99)' / Name = on30cm.high Station = ONSALA85 priority = 4 rf1 = 975 , 975 ifname = '2N' , '1N' fe = '30cm' , '30cm' rf2 = 1200 , 1200 altifn = '1A' , '2A' pol = RCP, LCP lo1 = 700 , 700 note = 'Confirmed by email J.Conway (JFD 25-08-99)' / Name = on21cm3 Station = ONSALA85 priority = 3 rf1 = 1100, 1100 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1230, 1230 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1000, 1000 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. / Name = on21cm4 Station = ONSALA85 priority = 4 rf1 = 1200, 1200 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1330, 1330 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1100, 1100 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. Higher freq LOs have higher priority. / Name = on21cm2 Station = ONSALA85 priority = 2 rf1 = 1300, 1300 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1430, 1430 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1200, 1200 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. / Name = on21cm5 Station = ONSALA85 priority = 5 rf1 = 1400, 1400 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1530, 1530 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1300, 1300 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. Higher freq LOs have higher priority. / Name = on21cm6 Station = ONSALA85 priority = 6 rf1 = 1500, 1500 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1630, 1630 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1400, 1400 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. Higher freq LOs have higher priority. / Name = onb18cm Station = ONSALA85 priority = 3 rf1 = 1600, 1600 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1720, 1720 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1500.0, 1500.0 note = 'Conway in my office 28Jan97, must be Low patch' ! ranges guessed assuming 100 - 200 BBC / Name = on21cm1 Station = ONSALA85 priority = 1 rf1 = 1600, 1600 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1500, 1500 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. / Name = on21cm7 Station = ONSALA85 priority = 7 rf1 = 1700, 1700 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1830, 1830 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1600, 1600 note = 'Values from E-mail J.Conway (CR 21Oct02)' ! tunable LO, several LOs specified. Higher freq LOs have higher priority. / Name = onb6cmOH Station = ONSALA85 priority = 3 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 4920, 4920 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4600.0, 4600.0 note = 'Values confirmed by E-mail J.Conway (JFD 17Oct01)' ! ranges guessed assuming 100 - 220 BBC range ! update from JFD (CR 17Oct01) / Name = onb6cm Station = ONSALA85 priority = 3 rf1 = 4920, 4920 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4830.0, 4830.0 note = 'email from Lindqvist (25May2007), must be Low patch' ! ranges changed for 1Gb/s AGP 201108 / Name = onb5cmOH Station = ONSALA85 priority = 5 rf1 = 6000, 6000 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6125, 6125 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5900.0, 5900.0 note = 'Values confirmed by E-mail J.Conway(CR 18Jan02)' ! IF filter 75-22MHz, BBC ranges 100- 225 BBC; / Name = on5cm Station = ONSALA85 priority = 5 rf1 = 6600, 6600 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6725, 6725 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6500.0, 6500.0 note = 'Values confirmed by E-mail J.Conway (CR 18Jan02)' / Name = onb1cm Station = ONSALA85 priority = 5 note = 'No 1 cm on larger Onsala dish' / Name = wb90cm station = WSTRBORK priority = 2 rf1 = 310, 310 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 380, 380 altifn = '1A', '2A' pol = RCP, LCP lo1 = 200.0, 200.0 note = 'Best estimates for now' ! From Foley 21 Sep 2004 (CR 040921) / Name = wb30cm.EV008B Station = WSTRBORK priority = 4 rf1 = 785.5 , 785.5 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 793.5 , 793.5 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 653.45, 653.45 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 791.5 MHz / Name = wb30cm.EM034 Station = WSTRBORK priority = 4 rf1 = 846.8 , 846.8 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 854.8 , 854.8 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 714.75, 714.75 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 848.8 MHz / Name = wb30cm.EP030 Station = WSTRBORK priority = 4 rf1 = 848.49, 848.49 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 856.49, 856.49 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 716.44, 716.44 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 850.49 MHz / Name = wb30cm.EO004C Station = WSTRBORK priority = 4 rf1 = 874.7 , 874.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 882.7 , 882.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 742.65, 742.65 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 876.7 MHz / Name = wb30cm.EV008A Station = WSTRBORK priority = 4 rf1 = 882.6 , 882.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 890.6 , 890.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 750.55, 750.55 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 888.6 MHz / Name = wb30cm.EB015B Station = WSTRBORK priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 990.7 , 990.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 854.65, 854.65 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 988.7 MHz / Name = wb30cm.EB015A Station = WSTRBORK priority = 4 rf1 = 986.7 , 986.7 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 994.7 , 994.7 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 854.65, 854.65 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 988.7 MHz / Name = wb30cm.EO004B Station = WSTRBORK priority = 4 rf1 = 1033.2 , 1033.2 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1041.2 , 1041.2 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 901.15, 901.15 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 1035.2 MHz / Name = wb30cm.EO004A Station = WSTRBORK priority = 4 rf1 = 1046.6 , 1046.6 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1054.6 , 1054.6 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 914.55, 914.55 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 1048.6 MHz / Name = wb30cm.EP031A Station = WSTRBORK priority = 4 rf1 = 1068.75 , 1068.75 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1076.75 , 1076.75 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 936.7, 936.7 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 1074.75 MHz / Name = wb30cm.VAH1 Station = WSTRBORK priority = 4 rf1 = 1123.2 , 1123.2 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1131.2 , 1131.2 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 991.15, 991.15 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 1125.2 MHz / Name = wb22.6cm Station = WSTRBORK priority = 4 rf1 = 1240, 1240 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1340, 1340 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1145.0, 1145.0 note = 'Values from E-mail T.Foley (JFD 07jan99)' ! BBC ranges 100 - 220 BBC; / Name = wb30cm.EP031B Station = WSTRBORK priority = 4 rf1 = 1163.25 , 1163.25 ifname = '2N' , '1N' altifn = '1A' , '2A' rf2 = 1171.25 , 1171.25 fe = '30cm' , '30cm' pol = RCP , LCP lo1 = 1031.2 , 1031.2 note = '** not final ** tuning must be re-calculated at WSRT (JFD 25/08/99)' ! supplied by Vermeulen 25/08/1999 ! Obs freq 1165.25 MHz / Name = wb21.1cm Station = WSTRBORK priority = 3 rf1 = 1360, 1360 ifname = '2N', '1N' fe = '21cm', '21cm' rf2 = 1460, 1460 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1265.0, 1265.0 note = 'Values from E-mail T.Foley (JFD 07jan99)' ! BBC ranges 100 - 220 BBC; / Name = wb1530 Station = WSTRBORK priority = 5 rf1 = 1530, 1530 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1660, 1660 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1440.0, 1440.0 note = 'Special entry red OH Ek10 Foley 25/1/00' ! ranges guessed assuming BBC 90 - 220 / Name = wb18cm Station = WSTRBORK priority = 3 rf1 = 1600, 1600 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1510.0, 1510.0 note = 'E-mail Foley 22Jan97 MFFE, must be using Low patch' ! ranges guessed assuming BBC 100 - 220 / Name = wbsx Station = WSTRBORK priority = 5 rf1 = 2240, 8300 ifname = '2N', '1N' fe = '13cm', '4cm' rf2 = 2520, 8580 altifn = '1A', '2A' pol = RCP, RCP lo1 = 2020.0, 8080.0 note = 'Wild guess from SX PC-Sched assuming high patch' / Name = wb6cmOH Station = WSTRBORK priority = 5 rf1 = 4750, 4750 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 4850, 4850 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4640.0, 4640.0 note = 'Values confirmed by E-mail T.Foley (JFD 2Oct98)' / Name = wb6cm_l Station = WSTRBORK priority = 2 rf1 = 4800, 4800 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' ! pol = RCP, LCP lo1 = 4820.0, 4820.0 pol = RCP, LCP lo1 = 4840.0, 4840.0 ! changed LO to 4840 for 1Gb/s - fictitious number 201108 note = 'Non-standard requested by VSOP project OK-d foley 290198' ! Prefered for 1Gb/s and eVLBI - changed rf1-rf2 OK-d Foley 201108 / Name = wb6cm Station = WSTRBORK priority = 3 rf1 = 4800, 4800 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5060, 5060 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4840.0, 4840.0 note = 'LO from PC-SCHED values, must be in Low patch' ! Changed rf1-rf2 for 1Gb/s OK-d Foley 201108 / Name = wb5 Station = WSTRBORK priority = 4 rf1 = 6000, 6000 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6200, 6200 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5900.0, 5900.0 note = 'Update from Foley, 25 Jan 2005' ! 6000 MHz is really at the edge of the receiver band / Name = wb5a Station = WSTRBORK priority = 0 rf1 = 6600, 6600 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6700, 6700 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6500.0, 6500.0 note = 'Best estimates for now' ! From Foley 21 Sep 2004 (CR 040921) / Name = wb_x Station = WSTRBORK priority = 4 rf1 = 8300, 8300 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8580, 8580 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8080.0, 8080.0 note = 'Wild guess from SX PC-Sched assuming high patch' / Name = wb1cm Station = WSTRBORK priority = 5 note = 'No 1 cm at WB; 1 cm just drips through the chickenwire' / Name = yb_sx Station = YEBES priority = 5 rf1 = 2210, 8130 ifname = C, A rf2 = 2350, 8630 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 1530, 7650 note = 'From vicente@cay.oan.es Thu May 29 12:52:22 1997' ! Relevant for the Yb 14m now obsolete / Name = yb7mm Station = YEBES priority = 4 rf1 = 41000 ifname = C, A rf2 = 49000 fe = '0.7cm' pol = LCP lo1 = 40900 note = 'LO tunable according to Vicente, just put something arbitrary' ! Relevant to Yb 14m - probably obsolete 211108 AGP / Name = yb7mm_sio Station = YEBES priority = 0 rf1 = 43000, 43000 ifname = C, A rf2 = 43300, 43300 fe = '7mm', '7mm' pol = LCP, LCP lo1 = 42400, 42400 note = ' ** LCP only **, (JFD 15jan99) ' ! Guess BBCs range ~600-900MHz / Name = ys40_sx Station = YEBES40M priority = 4 rf1 = 2210, 8150 ifname = B, A rf2 = 2350, 8650 fe = '13cm', '4cm' pol = RCP,RCP lo1 = 1530, 7650 note = 'OK email de Vicente 151008 - investigate further ' / Name = ys40_4cm Station = YEBES40M priority = 4 rf1 = 8150, 8150 ifname = C, A rf2 = 8650, 8650 fe = '4cm', '4cm' pol = LCP,RCP lo1 = 7650, 7650 note = 'LO taken from D.Grahams S/X configuration for EK028A' / Name = ys40_1cm Station = YEBES40M priority = 4 rf1 = 22050,22050 ifname = C, A rf2 = 22450,22450 fe = '1cm' pol = LCP,RCP lo1 = 21550,21550 note ='LO value by Francisco Colomer (21MAY08), BBC 500-1000MHz' / Name = ys40_1cm_nh3 Station = YEBES40M priority = 4 rf1 = 23350,23350 ifname = C, A rf2 = 24450,24450 fe = '1cm' pol = LCP,RCP lo1 = 23150,23150 note ='LO value by Francisco Colomer (21MAY08), BBC 500-1000MHz' / Name = ys40_5cmOH Station = YEBES40M priority = 4 rf1 = 5780,5780 ifname = C, A rf2 = 6280,6280 fe = '5cm', '5cm' pol = LCP,RCP lo1 = 5280, 5280 note ='RF values by de Vicente (FEB09), BBC 500-1000MHz' / Name = ys40_5cm Station = YEBES40M priority = 4 rf1 = 6420,6420 ifname = C, A rf2 = 6900,6900 fe = '5cm', '5cm' pol = LCP,RCP lo1 = 5910, 5910 ! 'P. de Vicente (apr09) note ='RF and LO values by de Vicente (FEB09), BBC 500-1000MHz' / Name = ys40_6cm Station = YEBES40M priority = 4 rf1 = 4658, 4658 ifname = C, A rf2 = 5158, 5158 fe = '6cm', '6cm' pol = LCP,RCP lo1 = 4158, 4158 note = 'P. de Vicente (apr09)' / ! ! stations with S2 or MkIII ! Name = hh21cm Station = HART, HART_S2 priority = 5 note = 'No 21cm at HartRAO' / Name = hh18cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 1600, 1600 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1490.0, 1490.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh18cm Station = HART priority = 3 rf1 = 1600, 1600 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1730, 1730 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1510.0, 1510.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! BBC ranges 100 - 200 / Name = hh13cm Station = HART priority = 3 rf1 = 2210, 2210 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2450, 2450 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2020.0, 2020.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! BBC ranges 200 - 500 / Name = hhsx Station = HART priority = 3 rf1 = 2210, 8180 ifname = '2N', '1N' fe = '13cm', '4cm' rf2 = 2450, 8980 altifn = '1A', '2A' pol = RCP, RCP lo1 = 2020.0, 8080.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! BBC ranges 100 - 200, 200 - 500 and 500 - 1000 with IF3 / Name = hh13cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 2225, 2225 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2375, 2375 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2120.0, 2120.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh6cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 4650, 4650 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5160, 5160 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4786.0, 4786.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh6cm Station = HART priority = 3 rf1 = 4700, 4700 ifname = '2N', '1N' fe = '6cm', '6cm' rf2 = 5100, 5100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 4600.0, 4600.0 note = 'Values confirmed by E-mail Jonathan Quick 221105 (CR)' / Name = hh5cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 6020, 6020 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6052, 6052 altifn = '1A', '2A' pol = RCP, LCP lo1 = 5880.0, 5880.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh4.5cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 6650, 6650 ifname = '2N', '1N' fe = '5cm', '5cm' rf2 = 6682, 6682 altifn = '1A', '2A' pol = RCP, LCP lo1 = 6510.0, 6510.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh4cm Station = HART priority = 3 rf1 = 8180, 8180 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8980, 8980 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8080.0, 8080.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! BBC range 200 - 500 / Name = hh4cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 8335, 8335 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8505, 8505 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8265.0, 8265.0 note = 'Values confirmed by E-mail Jonathan Quick 291100 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh3cm_S2 Station = HART, HART_S2 priority = 4 rf1 = 12070, 12070 ifname = '1N', '2N' fe = '3cm', '3cm' rf2 = 12240, 12240 altifn = '2A', '1A' pol = LCP, RCP lo1 = 12021.0, 12021.0 note = 'Values confirmed by E-mail Jonathan Quick 221105 (CR)' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh3cm_d Station = HART, HART_S2 priority = 6 rf1 = 12070, 12070 ifname = '2N', '1N' fe = '3cm' rf2 = 12240, 12240 altifn = '1A', '2A' pol = RCP, LCP lo1 = 12021.0, 12021.0 note = 'Dummy dual-pol entry, only LCP available (CR 2Jul02).' ! LBA BBC fixed at 160 MHz but LO tunable, works with MkIV too / Name = hh2cm Station = HART, HART_S2 priority = 5 note = 'No 2cm at HartRAO' / Name = hh1cm Station = HART, HART_S2 priority = 3 rf1 = 21400,21400 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 24100,24100 altifn = '1A', '2A' pol = RCP, LCP lo1 = 22000.0,22000.0 note = 'LO tunable, other arbitrary values possible (CR 21Feb07)' / Name = hh1cm_nh3_low Station = HART, HART_S2 priority = 3 rf1 = 23600,23600 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 23800,23800 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23550.0,23550.0 note = 'low-patch required, BBC 100-230MHz' note = 'LO selected for NH3 lines 23.6-23.7MHz, suggested by JQ' / Name = hh1cm_nh3_hi Station = HART, HART_S2 priority = 3 rf1 = 23800,23800 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 24000,24000 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23710.0,23710.0 note = 'low-patch required, BBC 100-230MHz' note = 'LO selected for NH3 line 23.9MHz, suggested by JQ' / Name = hh1cm_vlba Station = HART, HART_S2 priority = 3 rf1 = 23750,23750 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 23850,23850 altifn = '1A', '2A' pol = RCP, LCP lo1 = 23640.0,23640.0 note = 'low-patch required, BBC 100-230MHz' note = 'LO selected for new VLBA band' / Name = hh7mm Station = HART, HART_S2 priority = 5 note = 'No 7mm at HartRAO' / ! ===================================================================== ! The following entries in the SCHED frequency catalog are for geodetic ! VLBI stations. ! ===================================================================== Name = wzsx Station = WETTZELL priority = 5 rf1 = 2210, 8219 ifname = '2N', '1N' rf2 = 2360, 8865 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 2020, 8080 note = 'Estimates from Lorant sjouwerman@jive.nl May 2000; OK 02/05/00/RK' !CR: updates from Lorant (1Dec00) / Name = nysx Station = NYALES20 priority = 5 rf1 = 2210, 8180 ifname = '2N', '1N' rf2 = 2350, 8980 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 2020, 8080 note = 'Estimates from Lorant sjouwerman@jive.nl May 2000; OK?03/05/00/HD' !CR: updates from Lorant (1Dec00) / Name = masx Station = MATERA priority = 5 rf1 = 2210, 8180 ifname = '2N', '1N' ! LORANT rf2 = 2450, 8980 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 2020, 8080 note = 'Estimates from Lorant sjouwerman@jive.nl May 2000' !CR: updates from Lorant (1Dec00) / ! ===================================================================== ! The following entries in the SCHED frequency catalog are for mm (GMVA) ! VLBI stations in Europe. ! ===================================================================== ! Plateau de Bure (IRAM) at 3 mm, single pol Name = 3mm_pdbure-lcp Station = PDBURE Priority = 0 rf1 = 85800, 85800 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86400, 86400 fe = '3mm', '3mm' pol = LCP, LCP lo1 = 85919, 85919 note = '3-mm CMVA' / ! Plateau de Bure (IRAM) at 3 mm Name = 3mm_pdbure Station = PDBURE Priority = 0 rf1 = 85800, 85800 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86400, 86400 fe = '3mm', '3mm' pol = LCP, RCP lo1 = 85919, 85919 note = '3-mm CMVA' / ! Pico Veleta (IRAM) at 3 mm ! Name = 3mm_picovel Station = PICOVEL Priority = 0 rf1 = 86007, 86007 ifname = C, A rf2 = 86507, 86507 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 85507, 85507 note = '3-mm CMVA' / ! Pico Veleta (IRAM) at 2 mm ! Name = 2mm_pico-l Station = PICOVEL Priority = 0 rf1 = 128000,128000 ifname = B, D rf2 = 130000,130000 fe = '2mm', '2mm' pol = LCP, LCP lo1 = 128670,128670 note = '2-mm test' / ! ===================================================================== ! Chinese stations added sep 2009 ! ===================================================================== Name = kmsx Station = KUNMING rf1 = 2150, 8200 ifname = B, A rf2 = 2450, 8600 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 1600, 9100 note = 'From Hao Longfei 11 may 2009' / Name = mysx Station = MIYUN50 rf1 = 2150, 8200 ifname = B, A rf2 = 2450, 8600 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 1600, 9100 note = 'From ZHU Xinying 6 July 2009' / ! ===================================================================== ! Robledo 7mm added 2009 Sep 24 (Bob Campbell) ! (an example Cristina worked out for GB065B -- the LO is ! tunable; the Q-band LNA works from 39-49 GHz, and the max recording ! bandwidth is 70 MHz within that) ! ===================================================================== Name = ro7mm Station = ROB34BWG priority = 5 rf1 = 43156 , 43156 ifname = '2N', '1N' fe = '7mm', '7mm' rf2 = 43226 , 43226 altifn = '1A', '2A' pol = RCP, LCP lo1 = 42870.00 , 42870.00 note = 'new 7mm RX, configuration appropriate for GB065B' / ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for stations ! of the Asia Pacific Telescope. ! These stations are maintained in file freq_APT.dat. ! ===================================================================== Name = us18cm Station = USUDA, USUDAVL, USUDA64 priority = 5 rf1 = 1600, 1600 ifname = A, C rf2 = 1730, 1730 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 750, 750 note = 'LO and rf* from Kenta Fujisawa, e-mail 27/01/97 other values guesses' ! adding values by Kenta to obtain total LO ! confirmed ok May 1999 by K Fujisawa / Name = us6cm Station = USUDA, USUDAVL, USUDA64 priority = 5 rf1 = 4740, 4740 ifname = A, C rf2 = 5140, 5140 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4140, 4140 note = 'LO and rf* from Kenta Fujisawa, e-mail 27/01/97 other values guesses' ! adding values by Kenta to obtain total LO ! updated may 1999 with information from K Fujisawa / Name = us1cm Station = USUDA, USUDAVL, USUDA64 priority = 5 rf1 = 21900, 21900 ifname = A, C rf2 = 22300, 22300 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21300.0, 21300.0 note = 'LO and rf* from Kenta Fujisawa, e-mail 27/01/97 other values guesses' ! adding vlues by Kenta to obtain total LO ! updated may 1999 with information from K Fujisawa / Name = ka18cm Station = KASHIM34, KASHIMS2 priority = 5 rf1 = 1600, 1600 ifname = A, C rf2 = 1800, 1800 fe = '18cm', '18cm' pol = RCP, LCP lo1 = 1250.00, 1250.00 ! updated may 1999 with information from KM Shibata / Name = ka6cm Station = KASHIM34, KASHIMS2 priority = 5 rf1 = 4600, 4600 ifname = A, C rf2 = 5100, 5100 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4500.00, 4500.00 ! updated may 1999 with information from KM Shibata / Name = ka1cm Station = KASHIM34, KASHIMS2 priority = 5 rf1 = 21800, 21800 ifname = A, C rf2 = 23800, 23800 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 16800.00, 16800.00 ! updated may 1999 with information from KM Shibata / Name = no1cm Station = NOBEYAMA priority = 5 rf1 = 22000, 22000 ifname = A, C rf2 = 22300, 22300 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 21000.00, 21000.00 ! fake values pge 2-feb-99 / ! The following are VERA stations forwarded from Cormac Reynolds from ! Simon Ellingsen from Mareki Honma. See Reynolds email of Jan. 3, 2010. ! The stations are Mizusawa and Yamaguchi. They could be merged into a ! single entry, but I'll keep as is for now. RCW March 22, 2010. Name = Vm5cm Station = VERAMZSW priority = 4 rf1 = 6600, 6600 ifname = C, A rf2 = 6700, 6700 fe = '5cm', '5cm' pol = LCP lo1 = 6403, 6403 note = 'RF-256 MHz' ! M Honma (04/Feb/2009) / Name = Ym5cm Station = YAMAGU32 priority = 4 rf1 = 6600, 6600 ifname = C, A rf2 = 6700, 6700 fe = '5cm', '5cm' pol = LCP lo1 = 6403, 6403 note = 'RF-256 MHz' ! K Fujisawa (05/Feb/2009) / ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for the ! DSN antennas. ! These stations are maintained in file freq_DSN.dat. ! ===================================================================== ! ! DSN data also originally from Huib Jan van Langevelde ! Modified by Jim Ulvestad, 21 November 1997, based on information ! from Chuck Naudet of JPL. ! Name = go18cm Station = GOLD70 priority = 5 rf1 = 1608, 1608 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1708, 1708 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1380.0, 1380.0 note = 'LO from Altunin 3Feb97, must be Low patch (well they do anything)' ! Range assuming high patch ! rf and LO from Chuck Naudet, 20 Nov. 1997 (jsu) / Name = go13cm Station = GOLD70 priority = 5 rf1 = 2265, 2265 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2305, 2305 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2000.0, 2000.0 note = 'LO from Altunin 3Feb97, must be Low patch (well they do anything)' ! Range assuming high patch ! rf and LO from Chuck Naudet, 20 Nov. 1997 (jsu) / Name = go4cm Station = GOLD70 priority = 5 rf1 = 8400, 8400 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8500, 8500 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8100.00,8100.00 note = 'LO from Altunin via LJG via Greenhill' ! confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) / Name = go1cm Station = GOLD70 priority = 5 rf1 = 18000,18000 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 26000,26000 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21914.0,21914.0 note = 'LO from Altunin 01Nov96, must be Low patch (well they can do anything)' ! Range assuming low patch, but there is a problem with filters / Name = go1cm Station = GOLDMARS priority = 5 rf1 = 22140,22140 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22410,22410 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21914.0,21914.0 note = 'LO from Altunin 01Nov96, must be High patch (well they can do anything)' ! Range assuming low patch, but there is a problem with filters / Name = ti18cm Station = TID70, TID70_S2 priority = 5 rf1 = 1608, 1608 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1708, 1708 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1380.00, 1380.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! especially no idea on rf* and if names, uses ?? DAR ! earlier email suggested 1480 firstlo. ! rf and lo from Naudet, 20 Nov 1997 (jsu) / Name = ti13cm Station = TID70, TID70_S2, TID34_S2 priority = 5 rf1 = 2265, 2265 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2305, 2305 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2000.00, 2000.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! Email forwarded by Bill Scott. ! especially no idea on rf* and if names, uses ?? DAR ! IF range based on high patch nominal values. ! rf and LO confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) / Name = ti4cm Station = TID70, TID_S2, DSS34, TID70_S2 priority = 5 rf1 = 8200, 8200 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8600, 8600 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8100.00, 8100.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! Email forwarded by Bill Scott. ! especially no idea on rf* and if names, uses ?? DAR ! IF range based on high patch nominal values. ! rf and LO confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) ! June 2009 from Shingi Horiuchi rf range 8200-8600. Was 8400-8500 ! Need to confirm LO. / Name = ti1cm Station = TID70, TID70_S2 priority = 5 rf1 = 18000, 18000 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 26000, 26000 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21914.00, 21914.00 note = 'LO from Harbison, e-mail 03/02/97 other values guesses' ! especially no idea on rf* and if names, uses ?? DAR / Name = ro18cm Station = ROB70 priority = 5 rf1 = 1608, 1608 ifname = '2N', '1N' fe = '18cm', '18cm' rf2 = 1708, 1708 altifn = '1A', '2A' pol = RCP, LCP lo1 = 1380.00, 1380.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! especially no idea on rf* and if names, uses ?? DAR ! earlier email suggested 1480 firstlo. ! rf and LO confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) / Name = ro13cm Station = ROB70 priority = 5 rf1 = 2265, 2265 ifname = '2N', '1N' fe = '13cm', '13cm' rf2 = 2305, 2305 altifn = '1A', '2A' pol = RCP, LCP lo1 = 2000.00, 2000.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! Email forwarded by Bill Scott. ! especially no idea on rf* and if names, uses ?? DAR ! IF range based on high patch nominal values. ! rf and LO confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) / Name = ro4cm Station = ROB70 priority = 5 rf1 = 8400, 8400 ifname = '2N', '1N' fe = '4cm', '4cm' rf2 = 8500, 8500 altifn = '1A', '2A' pol = RCP, LCP lo1 = 8100.00, 8100.00 note = 'LO from Harbison, e-mail 20/03/97. other values guesses' ! Email forwarded by Bill Scott. ! especially no idea on rf* and if names, uses ?? DAR ! IF range based on high patch nominal values. ! rf and LO confirmed by Chuck Naudet, 20 Nov. 1997 (jsu) / Name = ro1cm Station = ROB70 priority = 5 rf1 = 18000, 18000 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 26000, 26000 altifn = '1A', '2A' pol = RCP, LCP lo1 = 21914.00, 21914.00 note = 'LO from Harbison, e-mail 03/02/97 other values guesses' ! especially no idea on rf* and if names, uses ?? DAR / ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for stations ! of the LBA ! These stations are maintained in file freq_LBA.dat. ! ===================================================================== Name = ho20cm Station = HOBART priority = 0 rf1 = 1350, 1350 ifname = '2N', '1N' rf2 = 1750, 1750 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1800, 1800 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho13cm Station = HOBART priority = 0 rf1 = 2200, 2200 ifname = '2N', '1N' rf2 = 2500, 2500 fe = '13cm', '13cm' pol = RCP, LCP lo1 = 1500.0, 1500.0 / Name = ho6cm Station = HOBART priority = 0 rf1 = 4550, 4550 ifname = '2N', '1N' rf2 = 5050, 5050 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4300.0, 4300.0 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho5cm Station = HOBART priority = 0 rf1 = 6450, 6450 ifname = '2N', '1N' rf2 = 6950, 6950 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4300.0, 4300.0 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho3cm Station = HOBART, HOB_MK5 priority = 0 rf1 = 8150, 8150 ifname = '2N', '1N' rf2 = 8700, 8700 fe = '3cm', '3cm' altifn = '1A', '2A' pol = RCP, LCP lo1 = 8080.0, 8080.0 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho2cm Station = HOBART priority = 0 rf1 = 12150, 12150 ifname = '2N', '1N' rf2 = 12650, 12650 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 1000.0, 1000.0 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho1cm Station = HOBART priority = 0 rf1 = 16000, 16000 ifname = '2N', '1N' rf2 = 26000, 26000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 19000.00, 19000.00 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = ho1cm Station = HOB_MK5 priority = 5 rf1 = 22300, 22300 ifname = '2N', '1N' fe = '1cm', '1cm' rf2 = 22700, 22700 altifn = '1A', '2A' pol = RCP, LCP lo1 = 22100.00, 22100.00 note = 'Dummy setup' / Name = hosx Station = HOBART, HOB_MK5 priority = 1 rf1 = 2190, 8180 ifname = '2N', '1N' rf2 = 2470, 8980 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 2020, 8080 note = 'Confirmed 11/06/2003 email from Brett Reid' ! lo1 is dummy value: lo is not controlled by VEX / Name = cd20cm Station = CEDUNA priority = 0 rf1 = 1350, 1350 ifname = '2N', '1N' rf2 = 1750, 1750 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1800, 1800 note = 'Dummy entry for Tests' / Name = cd13cm Station = CEDUNA priority = 0 rf1 = 2200, 2200 ifname = '2N', '1N' rf2 = 2500, 2500 fe = '13cm', '13cm' pol = RCP, LCP lo1 = 1500.0, 1500.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = cd6cm Station = CEDUNA priority = 0 rf1 = 4500, 4500 ifname = '2N', '1N' rf2 = 5000, 5000 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4100.0, 4100.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = cd4cm Station = CEDUNA priority = 0 rf1 = 6200, 6200 ifname = '2N', '1N' rf2 = 6900, 6900 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 5000.0, 5000.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = cd3cm Station = CEDUNA priority = 0 rf1 = 8200, 8200 ifname = '2N', '1N' rf2 = 8800, 8800 fe = '3cm', '3cm' pol = RCP, LCP lo1 = 7000.0, 7000.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = cd2cm Station = CEDUNA priority = 0 rf1 = 12000, 12000 ifname = '2N', '1N' rf2 = 12200, 12200 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 10000.0, 10000.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = cd1cm Station = CEDUNA priority = 0 rf1 = 21000, 21000 ifname = '2N', '1N' rf2 = 23000, 23000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 20000.0, 20000.0 ! updates June 2003 CJP by info from Simon Ellingsen / Name = at20cm Station = ATCA priority = 0 rf1 = 1250, 1250 ifname = '2N', '1N' rf2 = 1780, 1780 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 700.0, 700.0 ! updated june 2003 Chris Phillips, ATCA observers guide ! lo1 is dummy value: lo is not controlled by VEX / Name = at13cm Station = ATCA priority = 0 rf1 = 2200, 2200 ifname = '2N', '1N' rf2 = 2500, 2500 fe = '13cm', '13cm' pol = RCP, LCP lo1 = 2000.0, 2000.0 ! updated june 2003 Chris Phillips, ATCA observers guide ! lo1 is dummy value: lo is not controlled by VEX / Name = at6cm Station = ATCA priority = 0 rf1 = 4400, 4400 ifname = '2N', '1N' rf2 = 6700, 6700 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4500.0, 4500.0 ! updated june 2003 Chris Phillips, ATCA observers guide ! lo1 is dummy value: lo is not controlled by VEX / Name = at3cm Station = ATCA priority = 0 rf1 = 8000, 8000 ifname = '2N', '1N' rf2 = 9200, 9200 fe = '3cm', '3cm' pol = RCP, LCP lo1 = 7800.0, 7800.0 ! updated june 2003 Chris Phillips, ATCA observers guide ! lo1 is dummy value: lo is not controlled by VEX / Name = at1cm Station = ATCA priority = 5 rf1 = 16000, 16000 ifname = '2N', '1N' rf2 = 25000, 25000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 19000.00, 19000.00 ! updated june 2003 Chris Phillips, ATCA observers guide ! lo1 is dummy value: lo is not controlled by VEX / Name = at3mm Station = ATCA priority = 5 rf1 = 86000, 86000 ifname = A, C rf2 = 105000, 105000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 80000.00, 80000.00 ! lo1 is dummy value: lo is not controlled by VEX / Name = mp20cm Station = MOPRA priority = 0 rf1 = 1300, 1300 ifname = '2N', '1N' rf2 = 1800, 1800 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1000.0, 1000.0 ! updated june 2003 from Mopra Technical Summary ! lo1 is dummy value: lo is not controlled by VEX / Name = mp13cm Station = MOPRA priority = 0 rf1 = 1800, 1800 ifname = '2N', '1N' rf2 = 3000, 3000 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1600.0, 1600.0 ! updated june 2003 from Mopra Technical Summary ! lo1 is dummy value: lo is not controlled by VEX / Name = mp6cm Station = MOPRA priority = 0 rf1 = 4500, 4500 ifname = '2N', '1N' rf2 = 6700, 6700 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4500.0, 4500.0 ! updated june 2003 from Mopra Technical Summary ! lo1 is dummy value: lo is not controlled by VEX / Name = mp3cm Station = MOPRA priority = 0 rf1 = 8000, 8000 ifname = '2N', '1N' rf2 = 9200, 9200 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 7800.0, 7800.0 ! updated june 2003 from Mopra Technical Summary ! lo1 is dummy value: lo is not controlled by VEX / Name = mp1cm Station = MOPRA priority = 0 rf1 = 20000, 20000 ifname = '2N', '1N' rf2 = 24000, 24000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 19000.00, 19000.00 ! updated june 2003 from Mopra Technical Summary ! lo1 is dummy value: lo is not controlled by VEX / Name = mp3mm Station = MOPRA priority = 0 rf1 = 86000, 86000 ifname = A, C rf2 = 115000, 115000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 80000.00, 80000.00 ! lo1 is dummy value: lo is not controlled by VEX / Name = pa20cm Station = PARKES priority = 0 rf1 = 1200, 1200 ifname = '2N', '1N' rf2 = 1800, 1800 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1600.0, 1600.0 ! updated may 1999 with information from T Tzioumis. ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html/ / Name = pa13cm Station = PARKES priority = 0 rf1 = 2200, 2200 ifname = '2N', '1N' rf2 = 2500, 2500 fe = '20cm', '20cm' pol = RCP, LCP lo1 = 1600.0, 1600.0 ! updated may 1999 with information from T Tzioumis. ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pasx Station = PARKES, PARK_MK5 priority = 1 rf1 = 2200, 8100 ifname = '2N', '1N' rf2 = 2250, 8700 fe = '13cm', '4cm' pol = RCP, RCP lo1 = 2020, 8080.0 ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pa6cm Station = PARKES priority = 0 rf1 = 4500, 4500 ifname = '2N', '1N' rf2 = 5100, 5100 fe = '6cm', '6cm' pol = RCP, LCP lo1 = 4500.0, 4500.0 ! updated may 1999 with information from T Tzioumis. ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pa3cm Station = PARKES, PARK_MK5 priority = 0 rf1 = 8100, 8100 ifname = '2N', '1N' altifn = '1A', '2A' rf2 = 8700, 8700 fe = '3cm', '3cm' pol = RCP, LCP lo1 = 8080.0, 8080.0 ! updated may 1999 with information from T Tzioumis. ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pa4cm Station = PARKES priority = 0 rf1 = 5900, 5900 ifname = '2N', '1N' rf2 = 6800, 6800 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 4500.0, 4500.0 ! updated june 2003 Chris Phillips ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pa2cm Station = PARKES priority = 0 rf1 = 12000, 12000 ifname = '2N', '1N' rf2 = 15000, 15000 fe = '2cm', '2cm' pol = RCP, LCP lo1 = 10000.0, 10000.0 ! updated june 2003 Chris Phillips ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / Name = pa1cm Station = PARKES priority = 0 rf1 = 21000, 21000 ifname = '2N', '1N' rf2 = 24000, 24000 fe = '1cm', '1cm' pol = RCP, LCP lo1 = 19000.00, 19000.00 ! updated may 1999 with information from T Tzioumis. ! lo1 is dummy value: lo is not controlled by VEX ! http://www.parkes.atnf.csiro.au/documentation/user_guide/node4.html / ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for mm ! VLBI stations only. ! These stations are maintained in file freq_mm.dat. ! ===================================================================== ! Initial entries from mm-stations.dat from Krichbaum, Sept. 26, 2005. ! Actually none of these stations are in common use now (2005). ! Haystack at 3 mm dual-pol ! ! Receiver B is LCP, A is RCP Name = 3mm_haystk Station = HAYSTACK Priority = 0 rf1 = 86140, 86140 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86540, 86540 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 86040, 86040 note = '3-mm CMVA' / ! Haystack at 3 mm single-pol ! Name = 3mm_haystk-lcp Station = HAYSTACK Priority = 0 rf1 = 86140, 86140 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86540, 86540 fe = '3mm', '3mm' pol = LCP, LCP lo1 = 86040, 86040 !this works with 86210.99 note = '3-mm CMVA LCP only' / ! Quabbin at 3 mm ! Name = 3mm_quabn Station = QUAB Priority = 0 rf1 = 86169, 86169 ifname = '1N', '2N' altifn = '1A', '2A' rf2 = 86569, 86569 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 86069.1, 86069.1 note = '3-mm CMVA' / ! Kitt Peak 12-m at 3 mm ! Name = 3mm_KP12m Station = KITTPEAK Priority = 0 rf1 = 86168, 86168 ifname = B, D rf2 = 86668, 86668 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 85295, 85295 note = '3-mm CMVA' / ! Name = 3mm_KP12m-l Station = KITTPEAK Priority = 0 rf1 = 86168, 86168 ifname = B, D rf2 = 86668, 86668 fe = '3mm', '3mm' pol = LCP, LCP lo1 = 85295, 85295 note = '3-mm CMVA' / ! KITTPEAK v=2 SiO ! Name = 3mm_v2SiO_12m Station = KITTPEAK Priority = 0 rf1 = 85500, 85500 ifname = B, D rf2 = 86000, 86000 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 84686, 84686 / ! KITTPEAK 29 SiO ! Name = 3mm_29SiO_12m Station = KITTPEAK Priority = 0 rf1 = 85500, 85500 ifname = B, D rf2 = 86000, 86000 fe = '3mm', '3mm' pol = RCP, LCP lo1 = 84808, 84808 / ! 2mm VLBI test KITTPEAK 12m - PICOVEL ! Pico Veleta (IRAM) at 2 mm ! Name = 2mm_pico-l Station = PICOVEL Priority = 0 rf1 = 128000,128000 ifname = B, D rf2 = 130000,130000 fe = '2mm', '2mm' pol = LCP, LCP lo1 = 128670,128670 note = '2-mm test' / ! Kitt Peak 12m at 2 mm ! Name = 2mm_KP12m-l Station = KITTPEAK Priority = 0 rf1 = 128000,128000 ifname = B, D rf2 = 130000,130000 fe = '2mm', '2mm' pol = LCP, LCP lo1 = 128670,128670 note = '2-mm test' / ! ! ===================================================================== ! The following entries in the SCHED frequency catalog are for geodetic ! VLBI stations only. It's a bit thin so far! ! These stations are maintained in file freq_geodesy.dat. ! ===================================================================== Name = ap_sx Station = ALGOPARK priority = 5 rf1 = 2040, 2040, 8100, 8100 ifname = B, D, A, C rf2 = 2540, 2540, 8600, 8600 fe = '13cm', '13cm', '4cm', '4cm' pol = RCP, LCP, RCP, LCP lo1 = 1540.1, 1540.1, 7600.1, 7600.1 note = 'Based on Norbert Bartel info 20 Jan 2003.' ! ranges from assuming BBC can do 500 - 1000 MHz / Name = ap_sxw Station = ALGOPARK priority = 5 rf1 = 2040, 2040, 8100, 8580 ifname = B, D, A, C rf2 = 2540, 2540, 8600, 9080 fe = '13cm', '13cm', '4cm', '4cm' pol = RCP, LCP, RCP, RCP lo1 = 1540.1, 1540.1, 7600.1, 8080.0 note = 'Based on Norbert Bartel info 20 Jan 2003.' ! ranges from assuming BBC can do 500 - 1000 MHz / Name = ap_x Station = ALGOPARK priority = 4 rf1 = 8100, 8100 ifname = C, A rf2 = 8600, 8600 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 7600.1, 7600.1 note = 'Based on Norbert Bartel info 20 Jan 2003.' ! ranges from assuming BBC can do 500 - 1000 MHz / Name = ap_x Station = ALGOPARK priority = 4 rf1 = 8100, 8580 ifname = A, C rf2 = 8600, 9080 fe = '4cm', '4cm' pol = RCP, LCP lo1 = 7600.1, 8080.0 note = 'Based on Norbert Bartel info 20 Jan 2003.' ! ranges from assuming BBC can do 500 - 1000 MHz / ! From Haystack via Walter Brisken just before the real time test ! of May 7, 2007 ! Name = westx ! Station = WESTFORD Priority = 0 ! rf1 = 8180, 8180 ifname = '1N', '2N' altifn = '1A', '2A' ! rf2 = 8580, 8580 fe = '2cm', '2cm' ! pol = RCP, LCP lo1 = 8080, 8080 ! note = 'Westford - xband'/ Name = westx Station = WESTFORD Priority = 0 rf1 = 8180 ifname = '1N' altifn = '1A' rf2 = 8580 fe = '4cm' pol = RCP lo1 = 8080 note = 'Westford - xband'/ ! The LO's are 2020 and 8080 MHz with the IF upconverted by 479.9 MHz ! for the VLBA BBCs (need 500-1000 MHz). RCP only. ! Trying to feed all BBC's with X band will be a special patch case ! requiring a special setup. Name = tg_sx Station = TIGOCONC,OHIGGINS priority = 5 rf1 = 2210, 8180, 8580 ifname = B, A, C rf2 = 2450, 8600, 8980 fe = '13cm', '4cm', '4cm' pol = RCP, RCP, RCP lo1 = 1540.1, 7600.1, 8080.0 note = 'Based on email from Roopesh Ojha Nov. 10, 2008' /